Want To Buy ISO Wiser Precision Magnetospeed Mount

Discussion in 'Reloading Equipment and Components' started by Hiwayman92, Jul 9, 2019.


Help Support Long Range Hunting by donating:


  1. Hiwayman92

    Hiwayman92 Well-Known Member

    Messages:
    275
    Joined:
    Nov 1, 2014
    For those of you who have upgraded to a Labradar and has one of these set up for a picatinny rail, I’m interested.
     
  2. brguide

    brguide Well-Known Member

    Messages:
    68
    Joined:
    Oct 13, 2013
  3. Hiwayman92

    Hiwayman92 Well-Known Member

    Messages:
    275
    Joined:
    Nov 1, 2014
    I bought my magnetospeed used and it came with the gen 1 MK Mount. I only have pic rail attachments at the bipod stud area, and the rod is super short. I can’t figure any way to make it work without getting a longer rod, and even then the gen 1 setup looks pretty weak with that amount of leverage coming off of it.
     
  4. brguide

    brguide Well-Known Member

    Messages:
    68
    Joined:
    Oct 13, 2013
    From what i read you can buy a longer 5/8 rod aluminum on amazon or your local metal supply. It is enough support heck i built mine on my mill and lathe and mine is a direct mount to the screw holes. Otherwise sell it and grab the labradar, Maybe the only option. Call the MK guys they may trade out the old model and for a little money get new model and again they may not. Just some ideas, A longer aluminum rod will do you can buy them on amazon for around 5.00 for 36" x 5/8. Just an idea.
    IMG_20190526_171209303.jpg
     
    Hiwayman92 likes this.
  5. Hiwayman92

    Hiwayman92 Well-Known Member

    Messages:
    275
    Joined:
    Nov 1, 2014
    MK offered to sell me the Gen 2 for $125 since I had the Gen 1, but they are out of stock for a month. Still seeking the Wiser Mount, as I really like the Magnetospeed and don’t really want to go to the Labradar if I can help it.
     
    brguide likes this.
  6. brguide

    brguide Well-Known Member

    Messages:
    68
    Joined:
    Oct 13, 2013
    Then just get you a 5/8x24" aluminum rod from amazon and rig it in. You can then cut to your desired length. This is the most affordable option and worth a try. It will be a very rigid set up as long as all the set screws are tight.
    https://www.amazon.com/dp/B01HUBKCZO/?tag=lrhmag19-20
     
  7. Hiwayman92

    Hiwayman92 Well-Known Member

    Messages:
    275
    Joined:
    Nov 1, 2014
    I’m sure that is a possibility but I think the Wiser Mount looks very nice.
     
    brguide likes this.