i just started reloading for my 243 vanguard 26" tube. im using once fired fed brass, 87 vmax with 43.4grs of h4350 cci primers at 2.64" col..sized case length was 2.42"
he is where i need help. i dont have a chrono so i zeroed at a 100. (three shot group was .5") then went out to 300 to check the drop.
i shot 4 rounds at 300, two shots were 7.5" low 1 3/8 apart. the other two were 10" low 3 3/4" apart.
using my ballistic app. i adjusted the MV until it showed 8.75" drop at 300. 3320fps it what i ended up with.
im shooting at sea level.
how far off are my estimates.
i plain on finding the max col of my rifle next and start adjusting seating depth.
he is where i need help. i dont have a chrono so i zeroed at a 100. (three shot group was .5") then went out to 300 to check the drop.
i shot 4 rounds at 300, two shots were 7.5" low 1 3/8 apart. the other two were 10" low 3 3/4" apart.
using my ballistic app. i adjusted the MV until it showed 8.75" drop at 300. 3320fps it what i ended up with.
im shooting at sea level.
how far off are my estimates.
i plain on finding the max col of my rifle next and start adjusting seating depth.