• You must be a Supporting Member to create a listing in the Long Range Hunting Marketplace. To read all the rules, click here.

    We offer multiple options to become a Supporting Member here.

  • If you are being asked to change your password, and unsure how to do it, follow these instructions. Click here

Hunting weight 338 edge

TX mountain hunter

Well-Known Member
Joined
Dec 17, 2010
Messages
798
Location
West Texas
Let's get this sold this weekend. Price drops. First I'll take it gets it.

338 edge: semi custom, low round count (193), light enough for hunting (8lb scopeless, 10.1 as it sits), shoots good, just doesn't seem to get enough use.

$1,700 $1,500 $1,450 bare w radial brake
Or
$3,800 $3,600 $3,550 as it sits w NX8, NF UL rings, 5 port TiPro side port brake, flip caps, bubble level, etc

$4,400 $4,150 $4,090 shipped for everything but the powders and primers. I'd include those for local pickup.

Dies & tons of components available to buyer at very reasonable costs.

Previous owner had ¼ MOA load w HPBT & I had a couple < ½ MOA loads w eldX & TTSX. Round count estimated at 193.

Remington model 700 action
24" bbl (allowed to cool between shots)
KA Firearms LLC *chambering*
NX8 Ill. 4-32x50 F1
TiPro 3 ST DLC brake
Redding custom 338 edge die set

Not interested in trades at this time.
Not interested in separating at this time.
I'd pay shipping but buyer to pay any additional insurance or fees.
 

Attachments

  • IMG_2635.jpeg
    IMG_2635.jpeg
    1.8 MB · Views: 233
  • IMG_2611.jpeg
    IMG_2611.jpeg
    1.1 MB · Views: 224
  • IMG_2612.jpeg
    IMG_2612.jpeg
    807.8 KB · Views: 227
  • IMG_2613.jpeg
    IMG_2613.jpeg
    1.4 MB · Views: 246
  • IMG_2614.jpeg
    IMG_2614.jpeg
    800.4 KB · Views: 250
  • IMG_2618.jpeg
    IMG_2618.jpeg
    252.6 KB · Views: 244
  • IMG_2619.jpeg
    IMG_2619.jpeg
    365.7 KB · Views: 271
  • Ballistic-X-Export-2022-04-08 09:38:56.024631.jpg
    Ballistic-X-Export-2022-04-08 09:38:56.024631.jpg
    225.8 KB · Views: 264
  • IMG_2621.jpeg
    IMG_2621.jpeg
    1.5 MB · Views: 249
  • IMG_2633.jpeg
    IMG_2633.jpeg
    142.6 KB · Views: 231
Last edited:
Dang-- just made a deal on a 300rum-- probably would have bought this if you had posted a week ago

What is mag box length?
 
I can measure if you'd like but I recall that even during lands tests with 285 eldM it was more than enough for the longest I'd load.
 
Price drop for the week. Had this sold a time or two until pickup and unexpected injuries came up. If I can have this shipped before Monday I'll sell for less than it was originally spoken for twice. If not, I'll likely pull this in the next week or so.
 
All you want for that much gun, even w one of the best brakes in the industry for recoil reduction. Could lighten the scope if you wanted.
 
Last edited:
Brux 10 twist
I'm having trouble measuring it but I assume > 4.00" as this image is 3.908" OAL round and it seems to have a fair bit of room to spare:
I recently received a bit more history as it seems the original owner didn't like the recoil, instead of replacing with a more efficient brake he just parted the components. From there it seems it was cerekoted and reinstalled on the 700 action. Round count listed above is what I was told follows the barrel plus my own

I've since learned the barrel also liked the 300 smk not just the 250s. I don't think the 300s have been tested under the current setup but the rest of the loads described above have been, my hunting loads for sure.
 

Attachments

  • IMG_3564.jpeg
    IMG_3564.jpeg
    415.9 KB · Views: 44
  • IMG_3565.jpeg
    IMG_3565.jpeg
    1.1 MB · Views: 48

Recent Posts

Top