kac1345
Well-Known Member
Re: Here\'s mine, where is yours?
Here is mine
Keith
Here is mine
Keith
Here's mine, where is yours?
- Thread starter baldeagle713
- Start date
Help Support Long Range Hunting Forum
baldeagle713
Well-Known Member
Re: Here\'s mine, where is yours?
Now we're talkin Keep em commin.
Now we're talkin Keep em commin.
308 nate
Well-Known Member
Re: Here\'s mine, where is yours?
the first picture is my .308,.700 action leupold 6.5-20x40 mcmillian stock.unknown barrel maker I bought the barrel off ebay for 40$. It was a stainless blank.I made and installed the muzzle break also.shoots about .5 someday I would like to rebarrel it with a krieger barrel in .708
second pix is my 6MMBR.700 action krieger barrel leupold 6.5-20x40 it is truly a pleasure to shoot.It literaly has no recoil and will shoot .25 groups.I have taken prairie dogs at 700 yds. with a .55gr nosler crony'd at 3900 fps.
third pix. is a barrel block I built for my 7MM WSM which I am making .Savage action,Krieger barrel,benchrest stock,burris black diamond 8-32x50,20 MOA base,burris signature z rings with offset inserts.I hope to reach 1 mile......I know I'm obsessed but can't I try.
P.S my digital camera sucks the pictures don't do these justice.
[ 03-05-2004: Message edited by: 308 nate ]
[ 03-06-2004: Message edited by: 308 nate ]
[ 03-06-2004: Message edited by: 308 nate ]
[ 03-06-2004: Message edited by: 308 nate ]
[ 03-06-2004: Message edited by: 308 nate ]
the first picture is my .308,.700 action leupold 6.5-20x40 mcmillian stock.unknown barrel maker I bought the barrel off ebay for 40$. It was a stainless blank.I made and installed the muzzle break also.shoots about .5 someday I would like to rebarrel it with a krieger barrel in .708
second pix is my 6MMBR.700 action krieger barrel leupold 6.5-20x40 it is truly a pleasure to shoot.It literaly has no recoil and will shoot .25 groups.I have taken prairie dogs at 700 yds. with a .55gr nosler crony'd at 3900 fps.
third pix. is a barrel block I built for my 7MM WSM which I am making .Savage action,Krieger barrel,benchrest stock,burris black diamond 8-32x50,20 MOA base,burris signature z rings with offset inserts.I hope to reach 1 mile......I know I'm obsessed but can't I try.
P.S my digital camera sucks the pictures don't do these justice.
[ 03-05-2004: Message edited by: 308 nate ]
[ 03-06-2004: Message edited by: 308 nate ]
[ 03-06-2004: Message edited by: 308 nate ]
[ 03-06-2004: Message edited by: 308 nate ]
[ 03-06-2004: Message edited by: 308 nate ]
Farmboy
Member
Re: Here\'s mine, where is yours?
Here are my two, Sendero .300WM in front and Savage LE2B .308 in back.
Here are my two, Sendero .300WM in front and Savage LE2B .308 in back.
Hunter66654
Well-Known Member
Re: Here\'s mine, where is yours?
Nate, what stock is on your 6mmbr and how much does the rig weigh with scope ? Sharp Looking !
Nate, what stock is on your 6mmbr and how much does the rig weigh with scope ? Sharp Looking !
Mysticplayer
Well-Known Member
- Joined
- Jul 27, 2001
- Messages
- 1,459
Re: Here\'s mine, where is yours?
Here are pics of a few of my latest creations.
The first is a 35" barreled Enfield P14 in a homemade stock. Scope is now a Pentax Lightseeker 30 and the barrel is now ported. Timney trigger tuned to around 10ozs. Shoots a consistent 1/2 MOA or better out to 250yds. Too much snow to go further. Will try 1000m and eventually out to 2000m. Launching 240gr MK at 3075fps using H50BMG, Fed 215M, and Rem brass.
Second one I just sold. In a 6.5 Mystic, a wildcat I designed. Enfield P17 action with cock on opening speedlock, single stage trigger, homemade stock. Was a very consistent shooter in the 0.2" range. Used 140gr SST, H4831SC, and Fed 210M primers. Brass was modified Fed Gold Medal 308. Vel from the 25" barrel was 2750fps. Very light recoil and a pleasure to shoot.
Soon to be working on a new 6.5-06, M305 (Norinco M1A), and some close range big bore and cast LR rifles. Will post pics as they get built.
Jerry
Here are pics of a few of my latest creations.
The first is a 35" barreled Enfield P14 in a homemade stock. Scope is now a Pentax Lightseeker 30 and the barrel is now ported. Timney trigger tuned to around 10ozs. Shoots a consistent 1/2 MOA or better out to 250yds. Too much snow to go further. Will try 1000m and eventually out to 2000m. Launching 240gr MK at 3075fps using H50BMG, Fed 215M, and Rem brass.
Second one I just sold. In a 6.5 Mystic, a wildcat I designed. Enfield P17 action with cock on opening speedlock, single stage trigger, homemade stock. Was a very consistent shooter in the 0.2" range. Used 140gr SST, H4831SC, and Fed 210M primers. Brass was modified Fed Gold Medal 308. Vel from the 25" barrel was 2750fps. Very light recoil and a pleasure to shoot.
Soon to be working on a new 6.5-06, M305 (Norinco M1A), and some close range big bore and cast LR rifles. Will post pics as they get built.
Jerry
G
Guest
Guest
Re: Here\'s mine, where is yours?
Here are a few of mine--All sport McMillans and NF scopes, Badger rings, tapered bases, Jewell triggers, etc...
The two up front are .308 Win's for my short range stuff out to 600 yds, the next one is a .300RUM and the one in the back is a .300 Tomahawk--Hope to reach the mile mark on a PD at Ric's place this year...
Here are a few of mine--All sport McMillans and NF scopes, Badger rings, tapered bases, Jewell triggers, etc...
The two up front are .308 Win's for my short range stuff out to 600 yds, the next one is a .300RUM and the one in the back is a .300 Tomahawk--Hope to reach the mile mark on a PD at Ric's place this year...
Re: Here\'s mine, where is yours?
Here's my 300wm w/Leup BR24 w/Premier modified mil-dot reticle. Barrel's a Pac-nor 28" 3 groove 1.25" full length. Averages .6 moa w/me shooting, better when a better shooter shoots it! Best group so far is .369".
Here's my 300wm w/Leup BR24 w/Premier modified mil-dot reticle. Barrel's a Pac-nor 28" 3 groove 1.25" full length. Averages .6 moa w/me shooting, better when a better shooter shoots it! Best group so far is .369".
baldeagle713
Well-Known Member
Re: Here\'s mine, where is yours?
Sweet!
Sweet!
308 nate
Well-Known Member
Re: Here\'s mine, where is yours?
Hi Hunter66654,
thanks for the compliment on the stock.sorry for the bad picture.The stock color name is patriotic/red,white & blue. To answer your questions; The stock is made by elkridge stocks.at www.4gunstocks.com .
The gun including scope weighs 17Lbs.12oz.
would gladly answer any more questions you may have.
308 Nate
[ 03-10-2004: Message edited by: 308 nate ]
Hi Hunter66654,
thanks for the compliment on the stock.sorry for the bad picture.The stock color name is patriotic/red,white & blue. To answer your questions; The stock is made by elkridge stocks.at www.4gunstocks.com .
The gun including scope weighs 17Lbs.12oz.
would gladly answer any more questions you may have.
308 Nate
[ 03-10-2004: Message edited by: 308 nate ]
Stu
Well-Known Member
Re: Here\'s mine, where is yours?
C.J.,
you don't have a thing for tactical rifles at all do ya?
Here is my latest toy.
Later,
RedMan*
[ 03-11-2004: Message edited by: RedMan* ]
C.J.,
you don't have a thing for tactical rifles at all do ya?
Here is my latest toy.
Later,
RedMan*
[ 03-11-2004: Message edited by: RedMan* ]
jb1000br
Official LRH Sponsor
Re: Here\'s mine, where is yours?
Well I guess i'll throw one up too. Should have my 1K gun together in a couple weeks.
Here is my 308:
JB
Well I guess i'll throw one up too. Should have my 1K gun together in a couple weeks.
Here is my 308:
JB
Randy in Va
Well-Known Member
Re: Here\'s mine, where is yours?
Larger picture of the 40 Diaperhead one post below.
McBro 50 Heavy Benchrest stock, K&P 36 inch barrel (Teflon), 2 oz trigger, Prarie Gun Works Timberwolf action, US Optics SN-9 10-42 power. 419 grain solids expected at 3200 or 3250, we'll see!
Will shoot bullets thru it for the first time next Saturday. Yea, I know, I know.
[ 03-11-2004: Message edited by: Randy in Va ]
Larger picture of the 40 Diaperhead one post below.
McBro 50 Heavy Benchrest stock, K&P 36 inch barrel (Teflon), 2 oz trigger, Prarie Gun Works Timberwolf action, US Optics SN-9 10-42 power. 419 grain solids expected at 3200 or 3250, we'll see!
Will shoot bullets thru it for the first time next Saturday. Yea, I know, I know.
[ 03-11-2004: Message edited by: Randy in Va ]
