Hammer load help

[nhenry]

Hello all,

I bought some Hammer bullets for my fast-twist 25-06 and I'd like to know if anyone has any helpful information regarding load data. Below are the ones I have right now:
110gr Absolute Hammers
116gr Shock Hammers
121gr Hammer Hunters
128gr Hammer Hunters

I only have H4831 and H4350, but I have a good supply of both.

I made standard, run of the mills loads that I knew would be safe for all of them and they all shoot remarkably well, but I'd like to know maximums or loads that have worked for anyone else

Any information is helpful.

 

[ButterBean]

Absolute Hammer load data

I think this will work. @GLTaylor has been compiling load data from folks working up loads with the new Absolute Hammer bullets. Thanks to him for his hard work. I figured I would post it in a place where guys can find it more easily. If my link doesn't work then George can put his link in here.

www.longrangehunting.com

 

[ButterBean]

Hammer Hunter Load Data, (See page 1, Post 8)

OK, folks. Steve at Hammer Bullets has been getting requests for load data on Hammer Hunter bullets. There is an extensive spreadsheet for Absolute Hammer Load Data developed and shared by members on this Forum. Data for Hammer Hunters is on the Hammertime Forum, but it has not been placed...

www.longrangehunting.com

 

[ButterBean]

Hello all,

I bought some Hammer bullets for my fast-twist 25-06 and I'd like to know if anyone has any helpful information regarding load data. Below are the ones I have right now:
110gr Absolute Hammers
116gr Shock Hammers
121gr Hammer Hunters
128gr Hammer Hunters

I only have H4831 and H4350, but I have a good supply of both.

I made standard, run of the mills loads that I knew would be safe for all of them and they all shoot remarkably well, but I'd like to know maximums or loads that have worked for anyone else

Any information is helpful.

Just run them up until you see pressure and back off a grain, I would lean on the H4350