Group Pattern

parshal

Well-Known Member
Joined
Apr 29, 2002
Messages
1,380
Location
Colorado
Is there a specific pattern one looks for in a group? I know that either vertical or horizontal stringing is not good and that some people like to see a nice round or triangular group.

I ask this because I'm trying to develop a load have two that pattern a bit differently. One consistently shoots a more open but triangular pattern while the other will put two bullets in the same hole (or very near) and another near them.

I have links to two scanned targets. I'm thinking sticking with the 7828 but want to make sure that's the good place to start. BTW, my rifle is a .264 win mag with 26" barrel.
http://www.bambooflyrods.com/images/guns/7828.jpg http://www.bambooflyrods.com/images/guns/R22.jpg
 
Nice groups. Looks like you have a shooter on your hands. However, it can be annoying when you want all the bullets to cut the same hole.

Things to consider: Match primers and brass, barrel heat, scope parallax and magnification, stock design and recoil management, type of bullet, type of rests and bench, mechanical accuracy of load/rifle, and of course, wind and light.

If this was shot from a production hunting type rifle, you have nothing to worry about. Use the 7828 load, maybe consider match primers and brass, check your runout and bullet quality. Enjoy.

If you are planning to shoot this at long range, then do so with your two best loads. Any dispersions, stringing or other problems will make themselves abundantly clear the further you go. For a hunting rifle, MOA to your furthest range is all you can expect from a production rifle/barrel. Anything better is fantastic!!!

Good luck...

Jerry
 
I forgot to mention the particulars. It's a Rem 700 BDL with an H.S. Precision stock, Jewell trigger and replaced firing pin assembly (to get rid of that stupid j-lock). I'm using Remington brass (will be trying Winchester here soon), Federal 215M Gold Medal (?, can't remember the exact name) primers and Nosler Partitions. I have a feeling I'm flinching and that the rifle is capable of more than shows on the paper.
 
Warning! This thread is more than 22 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.
Top