SOLD/EXPIRED FS: custom 6-284 varminter

[COBrad]

Trued Remmy 700 SA with Sako extractor and heavy recoil lug, Jewell trigger with saftey, fluted #5 taper Shillen barrel with brake and cap, McMillan HBR, pillar bedded with removable sling studs; Davidson bases & 30MM Kelbly 4-screw rings. Extras: Redding dies; comp seater, FL, FL bushing type(W/O bushing), form die; 49 pcs twice-fired weight sorted & prepped Norma brass, necks concentric to .001, 45 or so pcs virgin Norma brass, weight sorted to 1.5%; Sinclair bore guide. Aprox. 450 rounds fired. Looks almost new. $1200 takes all.

 

[Guest]

u've got my attention. how many rounds? what size neck? how deep is throat {throated for 107,s or to feed through short action w/107's] ?
tried to e-mail no succsess

[ 04-28-2004: Message edited by: wayne408 ]

 

[COBrad]

Hi Wayne, the rifle has about 450 rounds through. I say about because I tried some 115 gr.VLD's which wouldn't stabalize, and I don't recall how many I fired. If I recall correctly the neck is .280. It's not a tight neck. It is an 8 twist barrel throated for 107's. I sent you an email.

 

[704]

what is the barrle lentgh?

 

[COBrad]

The barrel length is 25 3/4". I just double checked my chrono and the shots fired on 4/24 averaged 3058 fps. The load is 48 gr. H4831, Federal 210 primer, 107 gr SMK.

 

[COBrad]

Fella's if anyone is serious about this rifle I will take $1000. I'll be out for the next couple of days, will return any messages on Sunday.

 

[Guest]

COBrad ill be in touch , also leaving for 5 days.
wayne

 

[Dirtybob1]

Brad: I'll buy your rig for $1000. Give me an e-mail to firm things up.

Robert

 

[COBrad]

Sale pending