SOLD/EXPIRED FS - Blue-Printed Remington action & matching sleeve.


Well-Known Member
Mar 6, 2009
FS - Blue-Printed Remington action & matching sleeve.

Remington 600 short action RH, blue, converted to single shot, Davidson aluminum loading ramp epoxied in and the magazine slot filled with Duro Steel epoxy. Original bolt, PPC bolt face, easily & inexpensively opened to 308 face or bushed to 222 bf, with extractor conversion, and Rem. 40X bolt handle added & timed. Bolt lugs, bolt face, and action, faced square. Work done by Fred Sinclair. This action has a 7" 7075-T6 aluminum action sleeve, flat bottom, round top, drilled & tapped for scope bases and front guard screw.

Sleeve profile is similar to Stolle Panda profile. The sleeve has NOT been epoxied to the action yet, so any action or barrel fitting will be easy. Can be used as a glue-in or pillar bedded with screws.

Action is now essentially a short 40X single shot action. Would make a great glue-in or could be pillar bedded w/ conventional guard screws.

$625 + sh. to your FFL - must accept shipment from an individual.

Please email direct - [email protected]

See 6 pics here.