Elevation question

ddubas

Well-Known Member
Joined
Aug 11, 2005
Messages
208
Location
Eastern Nebraska
My friend has a Christensen Arms Steel Classic rifle. The top of the action has milled slots to accept weaver style rings. He has a Vortex Viper PST 6-24x50 30mm tube scope with Warne split rings medium height. The problem is once he has it mounted and bore sighted he is left with about 12 minutes of elevation. He would like to practice out to 1,000 but 12 minutes won't get him that far. What's next? Switch rings? Could he shim the rear ring? But I'm guessing that would cause issues, unless he lapped the rings. Is it the scope?
 
Don't shim the rings. That will only create other problems. He would need to lap a lot of material from the rings. Warne split rings are a bear to lap because they are steel. Plus he may remove too much material, requiring the rings to be machined. Bad path to start on.

Switch to Burris Signature Zee rings. Problem solved.
 
Warning! This thread is more than 10 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.

Recent Posts

Top