txsendero
Well-Known Member
What dies can one use to control neck tension besides Redding bushing dies?
Dies and neck tension?
- Thread starter txsendero
- Start date
Help Support Long Range Hunting Forum
Jim Carstenson at JLC Precision in Iowa will custom hone any die to fit your chamber and convert it redding/wilson neck bushings. under $50
he can also take a Redding body bump die and do the same with with as far as custom honing and converting to a FL bushing die.
BH
he can also take a Redding body bump die and do the same with with as far as custom honing and converting to a FL bushing die.
BH
Winchester 69
Well-Known Member
- Joined
- Mar 29, 2007
- Messages
- 430
Forster will hone the necks of their dies (for a small fee) to your specification. However, for all except dies not using an expander button, the expander button determines the neck dimension.
Mikecr
Well-Known Member
You can use most neck sizing dies to partial size -plenty enough.
You can use a redding body die/JLC for the rest of the sizing in a seperate operation.
You can use Sinclair expander die mandrels for post neck sizing -sizing, in a seperate operation.
You can use a Neil Jones decapping tool to punch primers in a seperate operation.
Lotta options..
[I do everything seperate of each other]
You can use a redding body die/JLC for the rest of the sizing in a seperate operation.
You can use Sinclair expander die mandrels for post neck sizing -sizing, in a seperate operation.
You can use a Neil Jones decapping tool to punch primers in a seperate operation.
Lotta options..
[I do everything seperate of each other]
