Die stands....

[The Oregonian]

Anyone found a good die stand? My bench is inside so that limits hanging utilitarian stuff on the wall. With Forster lock rings they no longer fit in the boxes they come in (rings too large to close lid) so I can't put them there and stack them on a shelf...they sit with lids at an angle and can't be stacked.

Found a few homemade wood ones online and a bracket that can be purchased (to be mounted on the wall, which is out for me) but wanted to see if anyone has come up with anything creative or has a good way to store if they have he same issue as me. I suck at wordwork and don't have any presses to drill holes, and don't know anyone that is into woodwork.

 

[J E Custom]

The Hornady new dimension boxes are larger and might work. I think you can order some for your use and protect the dies. years ago I tried a wood rack, and the effects of the humidity was bad.

https://www.midwayusa.com/s?userSearchQuery=Hornady+Die+storage+boxes&userItemsPerPage=48

J E CUSTOM

 

[Barrelnut]

I don't like leaving dies out and exposed to dust, etc. I keep them separated in individual compartments of small parts storage boxes. these work well you can keep all kinds of stuff in them and label them. I have primers, other die and small gun parts, etc. in them. They stack right on the bench and keep things in easy reach.

 

[FURMAN]

https://www.etsy.com/listing/509171...earch_query=reloading dies&ref=sr_gallery-1-7

I use this. One of the best pieces on my reloading bench.

 

[MNbogboy]

https://www.etsy.com/listing/509171814/reloading-die-shellholder-rack-bench?ga_order=most_relevant&ga_search_type=all&ga_view_type=gallery&ga_search_query=reloading dies&ref=sr_gallery-1-7

I use this. One of the best pieces on my reloading bench.

A nice clear dust cover over this would make it hard to beat.

 

[kiwikid]

I ran into the same issue when I bought the CO-AX press. With the smaller Redding dies I was able to alter the boxes with a Dremel to get them to fit. This was not an option with the longer Redding dies so for those I bought empty Forster Die boxes that Forster list for $8.20 each.

 

[The Oregonian]

I ran into the same issue when I bought the CO-AX press. With the smaller Redding dies I was able to alter the boxes with a Dremel to get them to fit. This was not an option with the longer Redding dies so for those I bought empty Forster Die boxes that Forster list for $8.20 each.


View attachment 102862 View attachment 102863 View attachment 102864

Thanks..think I am going to order the Forster boxes.

 

[VernAK]

Forster Deluxe Die Box works great.......I also use the Co-Ax and have switched other brand dies to these boxes.

 

[LoneTraveler]

When I had a reloading bench and shelves, I made a wood stand to hold my dies and shell holders, Had to dust, clean and oil them pretty often. When I started traveling with my job, I hunted up and use the original Die Boxes. Most of my dies are sets, So I keep Dies NS FLS, shell holder and extra decapping pins together in original box with dehumidify packets, I like this setup to protect my dies.