• You must be a Supporting Member to create a listing in the Long Range Hunting Marketplace. To read all the rules, click here.

    We offer multiple options to become a Supporting Member here.

SOLD/EXPIRED Defiance AnTi (SA/MBF) + Manners EH1

jsmitt6

Well-Known Member
Joined
Dec 2, 2020
Messages
341
Location
Utah
Had this AnTi action shooting a 338ss for the past year. Only about 150-175 rounds through the action. Had a local gunsmith make a relief cut in the feed lips to allow the 250 bergers to feed from the magazine. 100% done on a lathe and 100% feeding. Action comes with a Trigger Tech Primary. It is a Remington short action/magnum bolt face action (Defiance Medium action). Looking to get $1400 shipped to your FFL.

The Manners EH1 has the pillars bedded as well as an Area 419 rail installed. I believe it is the 10 or 12" version. It is the Swamp painted stock, and inlet for Remington 700 SA or clones. Looking for $900 shipped for this. Comes with the PTG M5 bottom metal and the WSM 3 round accurate mag. ($200 in in bottom metal and magazine). Barrel is inletted for a Proof Sendero contour.

Would love to sell the lot together, for $2200 shipped. Otherwise, prices are stated and we can negotiate from there. I am not interested in selling the action without the trigger OR selling the stock without the bottom metal (can keep the magazine for $75 off the price listed)
 

Attachments

  • IMG_5155.JPG
    IMG_5155.JPG
    4 MB · Views: 204
  • IMG_5156.JPG
    IMG_5156.JPG
    3.8 MB · Views: 200
  • IMG_5157.JPG
    IMG_5157.JPG
    4.1 MB · Views: 200
  • IMG_5158.JPG
    IMG_5158.JPG
    2.2 MB · Views: 196
  • IMG_5159.JPG
    IMG_5159.JPG
    1.9 MB · Views: 209
Last edited:
TTT.

Price drop to $1350 for the action, pic rail, and trigger.
Price drop to $800 for the Manners EH1, Arca Rail, Bottom Metal, Magazine

$2050 for both.
 
@6.5saum/300rum
The pillars were bedded with JB Weld. Nothing else was done to bed the action or recoil lug.

I did have to remove a little bit of material forward the recoil lug to accommodate the remage nut. I just painted it flat black to match the rest of the barrel channel.
 

Attachments

  • 1B624263-3397-4BFD-BA0E-F545B8B808FE.jpeg
    1B624263-3397-4BFD-BA0E-F545B8B808FE.jpeg
    1.7 MB · Views: 33
  • DD576F15-1F04-4895-B6A4-D775D58E5A43.jpeg
    DD576F15-1F04-4895-B6A4-D775D58E5A43.jpeg
    1.7 MB · Views: 39
  • 2A1E5B59-510A-4E91-A769-C87C6315DB2D.jpeg
    2A1E5B59-510A-4E91-A769-C87C6315DB2D.jpeg
    1.8 MB · Views: 34
Top