SOLD/EXPIRED Defiance AnTi (SA/MBF) + Manners EH1

[jsmitt6]

Had this AnTi action shooting a 338ss for the past year. Only about 150-175 rounds through the action. Had a local gunsmith make a relief cut in the feed lips to allow the 250 bergers to feed from the magazine. 100% done on a lathe and 100% feeding. Action comes with a Trigger Tech Primary. It is a Remington short action/magnum bolt face action (Defiance Medium action). Looking to get $1400 shipped to your FFL.

The Manners EH1 has the pillars bedded as well as an Area 419 rail installed. I believe it is the 10 or 12" version. It is the Swamp painted stock, and inlet for Remington 700 SA or clones. Looking for $900 shipped for this. Comes with the PTG M5 bottom metal and the WSM 3 round accurate mag. ($200 in in bottom metal and magazine). Barrel is inletted for a Proof Sendero contour.

Would love to sell the lot together, for $2200 shipped. Otherwise, prices are stated and we can negotiate from there. I am not interested in selling the action without the trigger OR selling the stock without the bottom metal (can keep the magazine for $75 off the price listed)

 

[jsmitt6]

TTT.

Price drop to $1350 for the action, pic rail, and trigger.
Price drop to $800 for the Manners EH1, Arca Rail, Bottom Metal, Magazine

$2050 for both.

 

[6.5saum/300rum]

I'm interested in the stock do you have a picture of the bedding?

 

[jsmitt6]

@6.5saum/300rum
The pillars were bedded with JB Weld. Nothing else was done to bed the action or recoil lug.

I did have to remove a little bit of material forward the recoil lug to accommodate the remage nut. I just painted it flat black to match the rest of the barrel channel.