Dan Tucker
Well-Known Member
I have a custom Tikka T3 22-250 that was built by Alex of Wheeler Accuracy. Rifle started out new as a stainless 243 with laminate stock purchased from Euro Optics and sent to Alex. Rifle has about 60 rounds on it. I have not reloaded for it as I moved a while back and never got my reloading stuff set back up. Very accurate with factory ammo and after sighted in I only shot a few 3 shot groups with the 3 different boxes of ammo I had. It shot very well, a tad above .5 with Hornady Super Performance, mid 4,s with straight Hornady and in the 4,s with Remington Premier. All were 50 grain bullets with the v-max type bullets. Rifle is in super shape and has a little brass rash on the rear receiver that does not show up in the picture. Listed below are the details and I am not looking for any trades.
* Stock was bedded to action
* Atlas works bottom metal, bolt shroud and bolt handle
* All metal was cerecoted graphite black
* Broughton 5c 5.5 contour and was fluted with 10 flutes by them. Chambered in a 14 twist 22-250 and total length is 22 inches
* New trigger spring and set around 1 pound.
SOLD
listed elsewhere
* Stock was bedded to action
* Atlas works bottom metal, bolt shroud and bolt handle
* All metal was cerecoted graphite black
* Broughton 5c 5.5 contour and was fluted with 10 flutes by them. Chambered in a 14 twist 22-250 and total length is 22 inches
* New trigger spring and set around 1 pound.
SOLD
listed elsewhere
Attachments
Last edited:
