SOLD/EXPIRED CUSTOM DEFIANCE 6.5PRC

[trowsers]

Selling my custom 6.5prc
defiance anti-x xm action
24" proof research sendero 1-7.5 twist
defiance bottom metal (snowy mountain)
mesa precision altitude stock
trigger tech special pro curve
srs chub titanium break
all metal has been coated in tungsten cerakote except for the bolt
rifle has 97 rnds down the tube, and is a real shooter, shoots factory hornady 143g as well factory barnes 130g into .5-.75 at 100, and really likes the hammer 124s, easliy under a 1/4 inch if you do your part
will take pictures tomorrow, as well as get an actual weight, if i recall correctly it was around 7lbs
asking $3800 plus actual cost of shipping to your ffl
feel free to reach out with any questions, could be interested in trades/ partial trades
thanks, Levi

 

[trowsers]

Added pictures, and got it on the scale, 7.64 lbs with scope and rings, should put it under 7 lbs bare rifle, (scope and rings not included in sale)
Forgot to mention the spartan precision gunsmith adapter as well

 

[trowsers]

to the top

 

[kickemall]

Coincidentally I handled this rifle today. Buy with confidence. Quality parts put together by a quality gunsmith. This is a really nice gun.

 

[trowsers]

bump, can include some peterson or lapua brass, also have primers and a few lbs of r26 available if face to face

 

[Coyote Shadow Tracker]

Just curious as to why you are selling it. It is a beautiful Rig and shoots great!

 

[trowsers]

Just curious as to why you are selling it. It is a beautiful Rig and shoots great!

well, for a couple reasons,
1, I recently purchased a new motorcycle and came a little farther out of pocket than i wanted
2, my father recently passed away and i plan to use his cooper 92 in .280ai for most anything that i will be hunting so this rifle would likely just sit in the safe
3, I want to build a 22 creedmoor and could use the money from this to get that going

 

[Northkill]

Selling my custom 6.5prc
defiance anti-x xm action
24" proof research sendero 1-7.5 twist
defiance bottom metal (snowy mountain)
mesa precision altitude stock
trigger tech special pro curve
srs chub titanium break
all metal has been coated in tungsten cerakote except for the bolt
rifle has 97 rnds down the tube, and is a real shooter, shoots factory hornady 143g as well factory barnes 130g into .5-.75 at 100, and really likes the hammer 124s, easliy under a 1/4 inch if you do your part
will take pictures tomorrow, as well as get an actual weight, if i recall correctly it was around 7lbs
asking $3800 plus actual cost of shipping to your ffl
feel free to reach out with any questions, could be interested in trades/ partial trades
thanks, Levi

What is your load and velocity on the 124HH?

 

[trowsers]

the load that shot that group was 60.5 grains of ramshot magnum with federal 210m in peterson brass, just a tick under 3000fps. i was in a hurry to get a load developed for deer season and didnt worry about maxing out velocity. in the process of developing a load over n560 but havent shot it over a chrono, should be good for north of 3300 fairly easily with that powder

 

[Coyote Shadow Tracker]

well, for a couple reasons,
1, I recently purchased a new motorcycle and came a little farther out of pocket than i wanted
2, my father recently passed away and i plan to use his cooper 92 in .280ai for most anything that i will be hunting so this rifle would likely just sit in the safe
3, I want to build a 22 creedmoor and could use the money from this to get that going

Sorry that your dad passed away our condolences.
You have some really nice rifles.
GLWS!!!
God Bless
Len & Jill

 

[Northkill]

the load that shot that group was 60.5 grains of ramshot magnum with federal 210m in peterson brass, just a tick under 3000fps. i was in a hurry to get a load developed for deer season and didnt worry about maxing out velocity. in the process of developing a load over n560 but havent shot it over a chrono, should be good for north of 3300 fairly easily with that powder

Shooting nice. Yeah, it'll do north of 3300. We are running 3400 in my son's PRC with that one. That's a sweet rig and a great buy. I wish you success and also grace for the loss and adjustments that always come with letting a loved one go - a dad at that.

 

[trowsers]

back to the top, somebody needs a lightweight tack driver, tell your friends

 

[trowsers]

Bump to the top

 

[trowsers]

back to the top, priced to sell, just the parts would be well over 4k retail to build this rifle