DoubleGobble00
Well-Known Member
- Joined
- Nov 5, 2007
- Messages
- 323
Up for sale is a custom long range hunting rig. If you want to get into long range shooting or hunting this is your gun. It easily shoots 1/4 to 1/2 MOA. I have shot 3-4 inch groups and less at 800 yards. I need to fund another gun project so this one needs to go.
Specification:
Blueprinted/trued Sako L691 action
Obermeyer medium heavy fluted barrel (1-11 twist i believe)
Recessed button crown
Joel Russo Laminate stock, clearcoated/wet sanded shiny finish
Pillar bedding with large pillars
Custom adjustable check piece
Limbsaver recoil pad
Trigger adjusted to around 1 lb (has not been measured but real light trigger)
30 MOA picatinny rail
**Scope, rings, and bipod are not included**
Stock was cracked before I bought the gun. It was fixed by inserting a metal pin and glueing/sealing the area. The colors were matched and then clear coated. See pictures for details. I have had this gun for 2 years since the crack and never had any problems with it. You can't even notice it is there but I want the buyer to have full knowledge of the rifle before purchase. Only other spots on the rifle is a couple small places were I wet sanded through the clear coat but nothing drastic.
100-yard groups... Easily less than 1/2 MOA. Have shot group out to around 800 yards in 3-4 inch groups using VV560 at 78 grains, 168 grain berger VLDs, 215 federal primers, and winchester brass that was running about 3300-3400 fps.
Asking $1100 shipped to your FFL or $1050 face to face. I am in the Jackson area.
Contact me at: 601.248.3801 or [email protected]
DoubleG
Specification:
Blueprinted/trued Sako L691 action
Obermeyer medium heavy fluted barrel (1-11 twist i believe)
Recessed button crown
Joel Russo Laminate stock, clearcoated/wet sanded shiny finish
Pillar bedding with large pillars
Custom adjustable check piece
Limbsaver recoil pad
Trigger adjusted to around 1 lb (has not been measured but real light trigger)
30 MOA picatinny rail
**Scope, rings, and bipod are not included**
Stock was cracked before I bought the gun. It was fixed by inserting a metal pin and glueing/sealing the area. The colors were matched and then clear coated. See pictures for details. I have had this gun for 2 years since the crack and never had any problems with it. You can't even notice it is there but I want the buyer to have full knowledge of the rifle before purchase. Only other spots on the rifle is a couple small places were I wet sanded through the clear coat but nothing drastic.
100-yard groups... Easily less than 1/2 MOA. Have shot group out to around 800 yards in 3-4 inch groups using VV560 at 78 grains, 168 grain berger VLDs, 215 federal primers, and winchester brass that was running about 3300-3400 fps.
Asking $1100 shipped to your FFL or $1050 face to face. I am in the Jackson area.
Contact me at: 601.248.3801 or [email protected]
DoubleG
