couple XP-100 on 14 ackley hornet

ewallace

Well-Known Member
Joined
Mar 17, 2002
Messages
991
Location
mi
I chambers up a couple xp-100s in 14 ackley hornets

first 14 AH
fluted parnor barrel 12.5" repeater contour
I trued the action
installed a PTG bolt release
PTG bolt
installed into a maple stock
here is a pic
P1010506.jpg

P1010503.jpg



14 AH #2
Fluted Pacnor barrel 1.200 HV contour
Trued action
Ptg bolt
Installed into a figured walnut stock
P1010509.jpg

P1010512.jpg

Here are a couple pics together
14-ah-1.jpg

P1010519.jpg
 
I got out this morning and shot the rear grip XP-100. I set up at the 100 yard line shooting at a old hi power target that was already set up and used the # on the target as my hold. I shot some 15g bullets with 9.1g AA 1680 they shot good going around 1/2" at 2665 fps average. Then I shot 3 17g bullets with 8.65g of AA 1680 the were going 2677 fps average and here are the results.

P1010524.jpg
 
Warning! This thread is more than 13 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.
Top