SOLD/EXPIRED Christensen Arms Ridgeline stock

[bulzeye11]

Put my ridgeline in a Grayboe stock so selling the carbon fiber composite ridgeline stock.
short action.


$250 shipped

 

[AkBirder300]

Long or short action?

 

[bulzeye11]

Long or short action?

oh yeah. short action

 

[cockcroft]

bottom metal inlet?
BDL or M5
thanks

 

[bulzeye11]

BDL

 

[Loosh338]

I will take it pm payment options

 

[HuntFarther]

These stocks only work with the Christensen arms bottom metal with out doing inletting

 

[bulzeye11]

These stocks only work with the Christensen arms bottom metal with out doing inletting

Really? I've heard it's a standard 700 bdl footprint

 

[HuntFarther]

No they are not. The floor plate is different.

 

[ssmith6]

Really? I've heard it's a standard 700 bdl footprint

I have a take off stock I bought recently. Give me until tomorrow and I will take a bdl bottom metal off a 700 and prove this right or wrong tomorrow. I thought the same thing when I bought mine also.

 

[HuntFarther]

I have a take off stock I bought recently. Give me until tomorrow and I will take a bdl bottom metal off a 700 and prove this right or wrong tomorrow. I thought the same thing when I bought mine also.

I've done quite a few of them. Had bottom metal and tried to use it on. Remington stock and would t work. Needed in letting. But yes please verify

 

[ssmith6]

 

[ssmith6]

Couldn't sleep thinking about this so came out to the garage to investigate. Footprint is the same. The difference is the B&C stock I'm comparing against is .050" deeper on the front screw, 0.100" deeper on the rear screw, and the area where the floor plate is has a slight curved cutout to accept the floor plate. The floor plate fits flush with the Christensen stock as is, the ends are not flush with the stock. Pictures for reference. I will cut the factory bedding out of the Christensen stock tomorrow to check internal box fitment and function. Initial verdict is it fits...it's just not flush.

 

[HuntFarther]

Couldn't sleep thinking about this so came out to the garage to investigate. Footprint is the same. The difference is the B&C stock I'm comparing against is .050" deeper on the front screw, 0.100" deeper on the rear screw, and the area where the floor plate is has a slight curved cutout to accept the floor plate. The floor plate fits flush with the Christensen stock as is, the ends are not flush with the stock. Pictures for reference. I will cut the factory bedding out of the Christensen stock tomorrow to check internal box fitment and function. Initial verdict is it fits...it's just not flush.

Just not a drop In fit. And worse trying to use their bottom metal on a Remington stock