SOLD I have a 300 WSM built by Christensen. The action was sent to Christensen for the following work: Install a custom 300 WSM carbon wrapped barrel, 19" (21" overall with brake). Action was Accurize (trued, faced and squared), lightened, and then teflon coated. Bolt was lightened, twist fluted, with a drilled handle and then teflon coated (has a Badger tactical bolt knob installed). Timney Trigger installed. Chritensen titanium muzzle brake installed. The stock is an HS Precision that has been camo dipped using hydrographic printing. The base layer green was supposed to be more OD, but it came out a lighter green. The pictures make it look a bit yellow-ish, but I assure it is green. The stock has two sling studs on the fore end, so you can install a bipod and sling. There only mark is some missing finish on the bolt knob, you can see it in the photos. The Leupold PRW mounts and rings are included and also the Harris bi-pod. I also have an optional Swarovski Z5 5-25x52 with the BRX ballistic reticule. This scope is new in the box and has never been mounted. Rifle weighs 7 pounds without the bipod, round count is under 50. Rifle without scope: $2200 shipped to your FFL Add $1350 for the scope (will not sell the scope separate from the rifle).