D
Deleted member 107666
Guest
I talked to my gunsmith. The reamer is set up for a no neck turn req'd, however he mentioned for proper/even neck tension, I would be benefited by a very light/cleanup neck turning to ensure uniformity.
I talked to my gunsmith. The reamer is set up for a no neck turn req'd, however he mentioned for proper/even neck tension, I would be benefited by a very light/cleanup neck turning to ensure uniformity.
OP, that ADG Brass is pretty consistent straight from the factory.
I'm not sure what you are hoping to gain over that, when it doesn't seem you know the steps to take to get you there? I would calm down and back away until your chamber is cut and you have a chance to at least shoot your rifle.