Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Gunsmithing
Calling all smith's
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="J E Custom" data-source="post: 326887" data-attributes="member: 2736"><p>To do it right you must in my opinion=</p><p></p><p>Using a good lathe .</p><p></p><p>Square the receiver face.</p><p>Square the receiver recoil lugs</p><p>Square the bolt recoil lugs.</p><p>Square the Bolt face.</p><p>Then lap the lugs just enough to smooth them.</p><p>All of this is done before head spacing and assuming that the bolt is not to loose in the</p><p> receiver.</p><p></p><p>Next I would install pillars , float the barrel and bed the action.</p><p>after curring time (48 hours) torque around 50+ inch pounds depending on the stock used.</p><p></p><p>I may have missed something but maybe the guys will speak up and add to it.</p><p></p><p>Or as ROY said get someone that knows how and have them do it.</p><p></p><p>J E CUSTOM</p></blockquote><p></p>
[QUOTE="J E Custom, post: 326887, member: 2736"] To do it right you must in my opinion= Using a good lathe . Square the receiver face. Square the receiver recoil lugs Square the bolt recoil lugs. Square the Bolt face. Then lap the lugs just enough to smooth them. All of this is done before head spacing and assuming that the bolt is not to loose in the receiver. Next I would install pillars , float the barrel and bed the action. after curring time (48 hours) torque around 50+ inch pounds depending on the stock used. I may have missed something but maybe the guys will speak up and add to it. Or as ROY said get someone that knows how and have them do it. J E CUSTOM [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Gunsmithing
Calling all smith's
Top