Brux .338 fluted barrel

Discussion in 'Sold/Expired' started by Earl Fouraker, Aug 28, 2018.

  1. Earl Fouraker

    Earl Fouraker Well-Known Member

    Messages:
    303
    Joined:
    Feb 18, 2007
    F61EA5EC-DD3C-4FFB-A22D-154B9B933791.jpeg BC3D7052-92BF-4A68-B917-FF470C9AAEFF.jpeg 565AA92C-C3DB-46C4-86E3-DBDEF1BD0E1C.jpeg I just received this barrel last week from Brux.

    .338, 1:9 twist, finish at 30”.

    Modified sendero contour 1.250x3.5” then .830 at muzzle.

    $425 shipped
     
    Last edited: Sep 1, 2018
  2. Zhomeguy

    Zhomeguy Well-Known Member

    Messages:
    284
    Joined:
    Aug 2, 2010
    You always have good stuff!
     
  3. rafterfp

    rafterfp Well-Known Member

    Messages:
    471
    Joined:
    Jun 25, 2011
    How much distance from end of flutes to muzzle?
     
  4. Earl Fouraker

    Earl Fouraker Well-Known Member

    Messages:
    303
    Joined:
    Feb 18, 2007
    I’ll get a measurement when I get home...I’d say approx 3.5” with an inch of that needing to be removed when fitting. If you were needing it shorter, a couple inches could be removed from the chamber end, depending on the what chambering is used.
     
    rafterfp likes this.
  5. Earl Fouraker

    Earl Fouraker Well-Known Member

    Messages:
    303
    Joined:
    Feb 18, 2007
    87A18751-0408-46C9-BD38-D14F57A50B09.jpeg 6D96D823-5F80-480C-8A00-E9204D8403DB.jpeg
     
  6. Earl Fouraker

    Earl Fouraker Well-Known Member

    Messages:
    303
    Joined:
    Feb 18, 2007
    Sold pending funds