Brass or chamber issue?

Dmagna

Well-Known Member
Joined
May 30, 2018
Messages
1,924
Location
New York
First three shots from new 6.5 prc barrel. Is the ring a chamber issue or something else. Headspace checked and is good.
 

Attachments

  • 9EE06E80-7532-4EF3-A45D-D36E62BB0D06.jpeg
    9EE06E80-7532-4EF3-A45D-D36E62BB0D06.jpeg
    1.6 MB · Views: 92
Wow....if youre firing brass that looks to be ringed like that..you are pushing it...looks like it is cut at least 1/3 of the way into the body.....if it doesn't look like that before firing...definitely need that chamber rehoned....your brass is all going to be ruined.....if you look at the piece to the right you can already see it bulging at the cut area.....run your borescope in there...show us the body area at the problematic area.....
I wouldnt waste any more brass til it's fixed.....money down the drain...
 
Wow....if youre firing brass that looks to be ringed like that..you are pushing it...looks like it is cut at least 1/3 of the way into the body.....if it doesn't look like that before firing...definitely need that chamber rehoned....your brass is all going to be ruined.....if you look at the piece to the right you can already see it bulging at the cut area.....run your borescope in there...show us the body area at the problematic area.....
I wouldnt waste any more brass til it's fixed.....money down the drain...
Ditto on the borescope, also cast the chamber.
 
Warning! This thread is more than 4 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.
Top