Brass cartridge conversions?.

[MI.264]

Looking for information on case conversions, "if I'm saying this correctly.
I have a .264 WinMag which has been a challenge to say the least to find Brass for
to say the least.
I know you can trim 7mm brass, are there any other cartridges that can be converted to .264 WinMag

Thanks in advance.

 

[grouse]

Nosler has it in stock.

 

[MI.264]

Nosler has it in stock.

I'm not looking for new brass. I'm looking for information as to what other brass I can use.
Thanks

 

[grouse]

Try this forum https://www.longrangehunting.com/forums/reloading.28/

 

[FEENIX]

Looking for information on case conversions, "if I'm saying this correctly.
I have a .264 WinMag which has been a challenge to say the least to find Brass for
to say the least.
I know you can trim 7mm brass, are there any other cartridges that can be converted to .264 WinMag

Thanks in advance.

.338 WM (closest), .257/.270/7MM WBY

 

[MI.264]

.338 WM, .257/.270/7MM WBY

Thanks FEENIX.

 

[Bret GRAVELINE Graveline]

Depending on how much work you are willing to put up with, just about any standard belted case will work, the parent case for all our belted magnums were the H&H 300/375 case and they will work, about the only cases that will not work are the 6.5 and 350 Remington magnums, to short, the 224 and 240 weatherbys won't work as they are undersized in diameter, again if you are will to do the case prep anything in the weatherby line can be made to work from the 257 up to 375, cases that will require the least amount of prep work are as follows, 7 mag, 308 Norma, 338 win, 358 Norm, 300 win, 7 mm stw, 8mm rem mag,

 

[MI.264]

Depending on how much work you are willing to put up with, just about any standard belted case will work, the parent case for all our belted magnums were the H&H 300/375 case and they will work, about the only cases that will not work are the 6.5 and 350 Remington magnums, to short, the 224 and 240 weatherbys won't work as they are undersized in diameter, again if you are will to do the case prep anything in the weatherby line can be made to work from the 257 up to 375, cases that will require the least amount of prep work are as follows, 7 mag, 308 Norma, 338 win, 358 Norm, 300 win, 7 mm stw, 8mm rem mag,

Thanks. I have all the equipment for trimming and sizing, so this gives me a whole lot of options. Thanks

 

[MI.264]

Appreciate the help, as always, Much Thanks. Glad this forum is here. Len and Family Saluté