Berger .284 168 Classic - 7PRC data?

Varmint Hunter

Well-Known Member
Joined
Dec 26, 2001
Messages
7,728
Location
Long Island, New York
I've got Berger's data for the 7PRC and their 175EH and 180 Hy-Tgt but I just picked up a box of Berger 168 Classic Hunters. Does anyone have Berger's data for this bullet? Other data? Hodgdon only lists Barnes 168gr which usually doesn't equate to c&c bullets.
 
Berger's data for the 168 Classic Hunters might not be as readily available online compared to their other bullets. However, you can start with the data for similar weight bullets and adjust accordingly. Since you mentioned Hodgdon only lists Barnes 168gr, you can use that as a reference point but remember to start at the lower end of the powder charge and work your way up while watching for pressure signs.
For more precise data, you might want to contact Berger directly or check if they have any updates on their website or reloading manuals. Using data from similar bullets like the 175EH or 180 Hy-Tgt can give you a rough idea, but always proceed with caution when working with new load data.
 
Berger has been good about sharing load data that they haven't published yet. Give 'em a shout via phone or email.

Hodgdon also has data for the 162 grain ELD-X, which is only a few grains lighter. Lots of data. I wouldn't have any reservation about using that as a starting point. Just start low and work up carefully, watching for pressure signs such as velocity spikes.

Guy
 

Recent Posts

Top