Was hoping Berger would get 338 cal 329 gr bullet out to start off 2021 but I'll take the 25 cal 135 gr LRHT , got a couple 257 screamers in the works

You are using an out of date browser. It may not display this or other websites correctly.

You should upgrade or use an alternative browser.

You should upgrade or use an alternative browser.

- Thread starter Swamplord
- Start date

Help Support Long Range Hunting Forum

Was hoping Berger would get 338 cal 329 gr bullet out to start off 2021 but I'll take the 25 cal 135 gr LRHT , got a couple 257 screamers in the works

Hopefully a hunting version is on its heels

Curious to see what your .25 is!Not what I was expecting but I'll take it, the 25 cal world just got a Berger with decent bc added, now I can proceed with my 25 cal wildcats that I set aside for a bit

Was hoping Berger would get 338 cal 329 gr bullet out to start off 2021 but I'll take the 25 cal 135 gr LRHT , got a couple 257 screamers in the works

View attachment 243007View attachment 243008

I'm with you. I think Berger had the 329 in there future lineup for a couple years. Been waiting on it myself.Not what I was expecting but I'll take it, the 25 cal world just got a Berger with decent bc added, now I can proceed with my 25 cal wildcats that I set aside for a bit

Was hoping Berger would get 338 cal 329 gr bullet out to start off 2021 but I'll take the 25 cal 135 gr LRHT , got a couple 257 screamers in the works

View attachment 243007View attachment 243008

I heard 135 A-Tip.

Curious to see what your .25 is!

this is simply the 6.5 Wby RPM necked down to 257 cal .....

I have a reamer coming for my improved version I call the 257 RIPM (Revolutions Improved Per Minute

duplicating 257 Wby velocities but in the standard 308/30'06 bolt face

Thought you'd have one coming pushing a little harder!this is simply the 6.5 Wby RPM necked down to 257 cal .....

I have a reamer coming for my improved version I call the 257 RIPM (Revolutions Improved Per Minute

duplicating 257 Wby velocities but in the standard 308/30'06 bolt face

View attachment 243359

Thought you'd have one coming pushing a little harder!

That ones a personal project