Available to Rent: 300 PRC AW2 Reamer

[charliehorse27]

I bought this to do my chamber and it was pretty easy after I got over the fear of doing something wrong. I'm renting it out to anyone else who needs this to do their's.

Comes with the T-handle extension so you don't have to pull the barrel off, and cutting oil.

$100 shipped to you, and return when finished.

 

[Philj]

Was it easy to tell when you touched shoulder?

 

[charliehorse27]

Fairly so? I put a piece of tape on the T-handle that corresponded to the back of the action so I could track how much farther the reamer was than when starting.

Right away, the reamer will start cutting into that area about .2" ahead ahead of the case head that's the cause of the problems. When it's done, it'll spin freely in the chamber. There's a really good thread over on LongRangeOnly.com detailing the process.

 

[bgbuck153]

I wish this was a 6.5 PRC AW2

 

[charliehorse27]

I have one of those on-order currently to do my other rifle. It's due at the end of March, and I'll do the same thing with that one when done, too.

 

[moto450]

id be interested in the 6.5 prc when your done.

 

[charliehorse27]

Send me a PM, and I'll put you on the list for the 6.5 AW2.

 

[moto450]

Send me a PM, and I'll put you on the list for the 6.5 AW2.

done

 

[CodyMac746]

Just curious, do you need different dies after doing this?

 

[charliehorse27]

Nope! This fix on the chamber will allow whatever dies you currently use to actually fully size the case.

 

[CodyMac746]

Perfect, I'm about to build one and have read of the problems. Now I've been reading on this but couldn't find wether I need special dies. Thanks

 

[JAYgs8163]

Perfect, I'm about to build one and have read of the problems. Now I've been reading on this but couldn't find wether I need special dies. Thanks

Many rifle builders have the new Reamer. Just a fyi, most prefit barrel builders have the new Reamer also.

 

[JAYgs8163]

I bought this to do my chamber and it was pretty easy after I got over the fear of doing something wrong. I'm renting it out to anyone else who needs this to do their's.

Comes with the T-handle extension so you don't have to pull the barrel off, and cutting oil.

$100 shipped to you, and return when finished.

View attachment 433848
View attachment 433847

Put me on the list for this 300PRC Reamer Please. I'll need it in about a month. Appreciate it.

 

[cellguy]

I'm almost finished with my barrel break in. I'll need this reamer. I'll be reaching out for sure. Great service idea!