Anyone want some 7/WSM load info?....

MikeW

Well-Known Member
Joined
May 28, 2001
Messages
63
Location
Texas
I couldn't find any and I know a few folks
are looking for it. I can't remember who emailed me to keep them informed but I beleive it was some of you guys so here it is. I'm sure some of you will catch the FPS between 62 & 63 grains. The fps was telling me I was reaching max but the primers and cases did not show any signs of pressure. The primers are no where near getting flat yet at 64 grains. I will pick up later and start at 64 gians and go up till I see pressure signs.

These loads were safe in my gun. Use this information at your own risk.

7/300WSM Based on the 300 WSM case not the
7/WSM case.

Bullet: Hornady 162 AMAX

Podwer: H4831SC

Primers: Rem. LR

Grains FPS

59.0 2828

60.0 2880

60.5 2921

61.0 2946

62.0 2972

62.5 2989

63.0 2985

63.5 2992

64.0 3045
 
Warning! This thread is more than 22 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.
Top