Any 6mm Creedmoor Fans ?

Weatherby Fan

Well-Known Member
Joined
Jan 10, 2011
Messages
720
Location
Maple Ridge, BC, Canada
Here's my latest build, acquired a SS Winchester 70 CRF SA a while back through some trading and settled on the 6mm CM build, looks to be a great little cartridge and with more and more factory ammunition offerings and some excellent brass available (ALPHA) I thought why not,

Ordered up the parts and dropped it off to Gary Bench and before long out pops another gem,
24' SS Benchmark 1-8 twist 5R barrel
Wildcat Stock out of Alberta,Canada
Factory trigger set at 2.5lbs

Now to find some Talleys and a scope and get this gem to the range !




 
Having AxisWorks build me one right now too.
Lone Peak Fuzion TI SA
TacOps Carbon Fiber knob
24" Proof Research Sendero
AxisWorks 3 port brake
TriggerTech Diamond
AxisWorks DBM w. AICS mags
Manners PRS2 in Tac Swamp
Cerakote all metal in Elite Sand
Seekins 30mm Medium .87" rings
Tangent Theta TT315M MIL

I have 300 pieces of Lapua SP brass, H4350, BR-2 & Fed GM210M, and a few bullets to try. 95 TMK, 105 HVLD 105 Hybrid, 110 SMK, 115 HVLD.
 
I'm shooting a Browning Hell's Canyon LR in 6 Creedmoor. Can't wait until deer season in November.
 

Attachments

  • C224D59A-2B2F-4BBD-9F03-BC4379F7A07B.jpeg
    C224D59A-2B2F-4BBD-9F03-BC4379F7A07B.jpeg
    1.2 MB · Views: 162
We have 3 of them. 2 bolts and a gas gun.
105vlds @3300, rl23
110smks @3227, h4350 and
107smks @2990 rl23 out of the ar

The 110's were far and away the most finicky to make shoot. The 105 load shoots great out all of them..."universal load"
 
Last edited:
That's a fine look rifle, looks like it has got some really low recoil. say how much did you spend on building this.
 
My son shoots one at the VBR shoot held at Ridgeway PA's 850-1000 match....to be honest it's a lot more accurate of a cartridge than I ever thought....coming from a Dasher-PPC fan....I'm impressed with the 6 CR...He shoots the Berger 105 Hybrid
 
We have 3 of them. 2 bolts and a gas gun.
105vlds @3300, rl23
110smks @3227, h4350 and
107smks @2990 rl23 out of the ar

The 110's were far and away the most finicky to make shoot. The 105 load shoot great out all of them..."universal load"
Specs on the rifle and load for the 105 @ 3300 and 110 @ 3227? Those are blistering speeds. A great hunting round.
 
The original 105 rifle is a 26" 7.5t pacnor on a 700. Adg brass, 210m and rl23. Primers are round at 45.8gr. Have to drop tube it. Shot an es of 5 with groups that a dime covers. It shoot well in all of them.

The 110 rifle is a 25" 7.5t pacnor on a bat machine. That is adg brass and 42.3gr h4350. Probably walked over a great rl23 load or 12 and didn't know. Had stock issues, but this shoots light out so it doesn't matter.

Built the original for coyotes and ended up chop sawing it down for my daughter. She took to it well so we built her her own on the 110's. 1000#'s of energy out to 8-850yrds with next to no recoil is pretty cool.
 
Last edited:
My build that is almost done is on a LP Fuzion TI w. 24" 1:7.5 Proof barrel. I was hoping for 3100 w. 105 Hybrids or 110 SMKs. Looks like those speeds should be very easily doable.
Lapua SR brass
CCI BR-2 or Fed GM210M
H4350 or RL23 (have 10+ #s of each)
700 @ 105 Hybrid & 500 @ 110 SMKs
 
We have 3 of them. 2 bolts and a gas gun.
105vlds @3300, rl23
110smks @3227, h4350 and
107smks @2990 rl23 out of the ar

The 110's were far and away the most finicky to make shoot. The 105 load shoot great out all of them..."universal load"

Can you post pics and details on your gas gun??
 
I have one picture of it with the first three attempts at a seating depth for a load with the 107's. 40 some rounds down it. I'm sure it will settle into something pretty good. I have tried to push it harder but I have hit the ceiling on rl23. Going to move to rl16 and see if I can't get up to 3050 or so. The 105 load is 3220 out of it and shoots sub .5 but is mean to the brass out or the ar.

It's on a sun devil upper and lower, jp high pressure bolt, and a 24" McGowan 7.5t.
 

Attachments

  • 0F67B85B-8A58-402C-A52F-4C167F81A114.jpeg
    0F67B85B-8A58-402C-A52F-4C167F81A114.jpeg
    1.1 MB · Views: 134
Warning! This thread is more than 6 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.

Recent Posts

Top