MagnumManiac
Well-Known Member
- Joined
- Feb 25, 2008
- Messages
- 5,553
As I said, if you're not sure about a custom reamer, then go for a Match Grade reamer, either throated for a target type VLD bullet or whatever your gunsmith recommends.
There is ABSOLUTELY nothing the WSM will do that a 7RM won't do and, the belt is NOT problem if you size your brass correctly and have your chamber cut PROPERLY with .220" headspace, no more and no less.
Cheers.
There is ABSOLUTELY nothing the WSM will do that a 7RM won't do and, the belt is NOT problem if you size your brass correctly and have your chamber cut PROPERLY with .220" headspace, no more and no less.
Cheers.