Advice on bases for Sako A2

[Hardware]

I am looking for advice on which scope base and rings for a Sako AII (Short Action) 22-250 would you recommend?

Thank you

 

[Gary in MD]

I'd find a one piece pic rail and then use the Burris signature rings. Loctite on the screws. They will hold the scope securely and won't leave a mark on your scope.

 

[Sockeye66]

I originally went with Leupold ring mounts and then tried a Rechnagel rail which I didn't care for because the scope sat to high for my liking, went back to the ring mounts and have had no issues with them, they're medium rings on a Leupold 2-7x33.

 

[Sockeye66]

The rifle is also an A11 in 7-08.

 

[Dean2]

The one piece Leupold, Sako etc mounts that go straight onto the groove have been far and away the best set up. You can get them from extra low to high and get the scope as low as possible with little futzing around.

 

[LouisianaHunter]

I am looking for advice on which scope base and rings for a Sako AII (Short Action) 22-250 would you recommend?

Thank you

I had good luck with Warne rings on my AIII . A friend swears by his Talleys . Might want to take a look at those options .