General RE LEE
Well-Known Member
Midway got some Accurate Powders in and I was able to score 4064 and 4350.
Are these comparable to IMRs offerings?
Are these comparable to IMRs offerings?
Accurate Powders: Scored 4350 and 4064
- Thread starter General RE LEE
- Start date
Help Support Long Range Hunting Forum
Comparable? Yes. Hodgdon actually owns the brand. Use their reloading database. Lots of good info.
Reloading Data Center
shop.hodgdon.com
General RE LEE
Well-Known Member
I did a little digging and Accurate 4064 is not the same as IMR4064
dhois
Member
PV has some h4350 and h4831 h4831sc. I don't need powder so I am not picking any up. Now LRM primers I haven't seen in a long long time.
General RE LEE
Well-Known Member
I looked at the PDF and there is load data for the 308 with Accurate 4064. I'm concerned I'll get compressed loads and won't get good velocity but will load some up and find out.
You should get good velocities. Compressed loads aren't generally an issue. The only problem I've ever had was with bullets backing out. Since I didn't want to crimp I switched from WW brass to Remington and it cured the problem.
Shoot loads with 3 cartridges in the magazine. After the first shot add another, so on and so forth. Then compare the ogive measurements for the bottom 3. You'll know right away if you have a problem.
Privy Partizan is the thickest at the neck that I've found. They actually make good brass (IMHO).
Shoot loads with 3 cartridges in the magazine. After the first shot add another, so on and so forth. Then compare the ogive measurements for the bottom 3. You'll know right away if you have a problem.
Privy Partizan is the thickest at the neck that I've found. They actually make good brass (IMHO).
Justice1327
Well-Known Member
Agree, not the same... but comparable, as you asked, yes.
