7mmSTW Picture Thread

[StaMic006]

Stiller predator, long action 7 stw, I have the 338 cip lapua mags. I got the mags from them a while back, they are a good shop. I'm running them in a Seekins DBM system right now. Works great but I'm thinking about this stock as I'm mostly shooting this rifle at targets and for fun. I have another 7 stw to hunt with.

Thanks,

You'll just need to order the Rem 700 LA 300 WM. (AI AT 26699 AICS 2.0 L/A .300)
It's an easy swap. I do a lot of shooting for fun and I use it for hunting fields here in GA. I'm building another STW now in a manners T5 that will probably be my new hunting rig. I'm setting it up to shoot the Berger 195's if they ever come out.

 

[sdeviation]

not for every one...
but was a lil project i worked on,havent shot it yet .
Boyds pro varmint and a rem SPS with factory brake
my first cerakote project

 

[gamehawker]

not for every one...
but was a lil project i worked on,havent shot it yet .
Boyds pro varmint and a rem SPS with factory brake
my first cerakote project

Very Nice!

 

[etisll40]

I like it, classy, no animal will see you anyway, you shoot from "way over there!"

 

[jweigel]

Finally got my Sendero 7STW together as the scope finally arrived. Greybull Stock, Timney trigger, Leupold VX6 4-24 TMOA. Now to dial in the 180VLD and get a ballistic cap made. Or just stay with a MOA cap.

jjw
ND

 

[sdeviation]

Very Nice!!!
I just luv Stainless fluted ...i cant say no to them ...

 

[338edge]

Here's my 7mmstw

-Hart 1-9 twist 26" fluted barrel
-McMillan A-3 75% tan 25% marble finish
-Holland muzzle brake and cheek piece
-jewel trigger
-Atacr with NF rail, rings & level
-shoots .2 & .3 with 180 gr berger bullets traveling 3104
- load = 74.0 grs of 7828, nosler brass, lit with a cci 250

 

[just country]

evening, I do have question. with the STW brass getting very hard to buy. why would

a person want to build such a superb weapon and can not find brass to reload the weapon?

I would like to build a 7STW, I have all the components , but can not find the brass. I

have 7rum and a 7wsm. the 7 STW is a much superb cartridge. all 3 7's brass is

very hard to find. if u do find the 7stw brass like 50 rounds is $150. New

just ranting about the reloading supplies situation. id read the postings

how shooters have found a honey hole, but will not divulge the source. u better

buy all the supplies u can find. things r going to get worse

I am building a 340bee. the brass of the bee in some cases is cheaper than all 3

7's brass. We all love our sport.

just country lightbulb

 

[StaMic006]

evening, I do have question. with the STW brass getting very hard to buy. why would

a person want to build such a superb weapon and can not find brass to reload the weapon?

I would like to build a 7STW, I have all the components , but can not find the brass. I

have 7rum and a 7wsm. the 7 STW is a much superb cartridge. all 3 7's brass is

very hard to find. if u do find the 7stw brass like 50 rounds is $150. New

just ranting about the reloading supplies situation. id read the postings

how shooters have found a honey hole, but will not divulge the source. u better

buy all the supplies u can find. things r going to get worse

I am building a 340bee. the brass of the bee in some cases is cheaper than all 3

7's brass. We all love our sport.

just country lightbulb

I've got 200+ rounds of once fired nosler brass if you are interested...

 

[MudRunner2005]

evening, I do have question. with the STW brass getting very hard to buy. why would

a person want to build such a superb weapon and can not find brass to reload the weapon?

I would like to build a 7STW, I have all the components , but can not find the brass. I

have 7rum and a 7wsm. the 7 STW is a much superb cartridge. all 3 7's brass is

very hard to find. if u do find the 7stw brass like 50 rounds is $150. New

just ranting about the reloading supplies situation. id read the postings

how shooters have found a honey hole, but will not divulge the source. u better

buy all the supplies u can find. things r going to get worse

I am building a 340bee. the brass of the bee in some cases is cheaper than all 3

7's brass. We all love our sport.

just country lightbulb

Buy 8mm RemMag brass and run a single trip through a 7mm STW FL sizing die, and you have 7mm STW brass. It's also cheaper and much easier to find than headstamped 7mm STW brass.

I use cheap .270 Win brass to form for my .25-06 AI. It's much more complicated than converting 8mmRM brass to 7mm STW.

 

[Slick8]

7mm STW
28" 1:9 Douglas barrel with Harrell's Brake in Tungsten Cerekote, black bolt and bottom metal
Fluted barrel, bolt and hex cut shroud.
Trued Slab Sided Safety 1968 model action, original trigger tuned to a CRISP 1.75 lbs. by Neil Jones.
McM A3 stock
PTG Bottom metal, hinged
Wyatt's extended mag box
5-20 Huskamaw in Seekins rings on a modified Larue 20 moa mount

All Machine work, Cerekote and Stock Bedding done by Alamo Precision Rifles in Hurst Texas.

 

[Lefty7mmstw]

a couple of pics of my rebuilt stick

 

[MudRunner2005]

I've had this rifle since about this time last year, but never put a scope on it. Today I realized I had an old crappy scope sitting in the safe and some old Leupold mounts sitting around, and figured it would be good enough to do some load development with. It's a semi-custom build.

Blueprinted 700 CDL RUM action
26" worked & crowned factory Rem Sendero 7mm STW barrel
HS Precision 5R Milspec stock - Professionally bedded w/ Devcon (interested in trading for old Sendero stock w/ NO palm swell)
Worked Rem/Walker trigger
Leupold Rings & Bases (temporary)
Tasco World Class 3-9x50 (temporary)

 

[StaMic006]

My new rig.

Accurate Ordnance 7mm STW
Defiance Deviant Action
Jewell Trigger
26" Benchmark 1:8 bbl
Manners T5 w/mini chassis