7MM accubond LR

I found a technical note in my 175 long range accubond and 150 long range accubond bullet box it says share load data for Nosler bullets of equal caliber and weight.It also also states when reloading the accubond LR bullet,Nosler balliticians have found the maximum Saami overall cartridge lengths tend to provide best accuracy.
 
In my 26" 7mmRemMag I am using the 168's with 79.3gr of RL-33 for an average MV of 3,128fps from Quick Load.

Damm accurate too.
 
INGWE, what seating depth are you doing. I just spent the day shooting 68grain, 70 grain, and 72 grain Retumbo, c.o.a.l was 3.390. I found so far that 70grain shot the best. It was 1" group at 200yrds. I need to now fine tune it to get down to 1/2 group. I am open to trying other loads to see what works best.
 
By bullets touch the lands at 3.441 and my seating depth is COAL/Ogive is 2.650"

Good Luck, you'll find something that works!
 
Warning! This thread is more than 9 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.
Top