6.8 Western

[tknuts103]

Not yet, I am waiting to shoot anymore until my new muzzlebrake arrives which should be soon.

 

[tknuts103]

I have shot little but haven't really tried to see what is best. I plan on using my new brake vs stock brake. I can let you know how they group out with the stock brake

 

[michaelfelix13]

I have shot little but haven't really tried to see what is best. I plan on using my new brake vs stock brake. I can let you know how they group out with the stock brake

Thank you please keep me updated

 

[Ole Dead Eye]

I have shot little but haven't really tried to see what is best. I plan on using my new brake vs stock brake. I can let you know how they group out with the stock brake

What brake did you purchase/get?? Thanks. Ken

 

[tknuts103]

What brake get you purchase/get?? Thanks. Ken

I went with the unknown munitions self timing brake. I have heard it cuts down the recoil quite a bit compared to the stock brake

 

[Ole Dead Eye]

I went with the unknown munitions self timing brake. I have heard it cuts down the recoil quite a bit compared to the stock brake

Let us know how it works??

 

[tknuts103]

Let us know has it works??

I will

 

[Okie Whitetail Hunter]

I have the Browning Xbolt HC long range and it shoots the factory 165s under MOA at 100 yards. I havent been to my dads place yet to shoot 400 yards but suspect it will hold MOA or under. I have the 175 gamechangers to reload but havent made it that far yet. Plan on running H4831SC or H4350.

 

[tknuts103]

Bad news. Received my brake and it didn't fit lol. Browning told me it is a M13x.75 on the speed guns. Well any 6.8 western speed made in 2021 now has the standard 5/8 x 24 threads. So I am going to order the Browning recoil hawg instead.

 

[Ole Dead Eye]

Bad news. Received my brake and it didn't fit lol. Browning told me it is a M13x.75 on the speed guns. Well any 6.8 western speed made in 2021 now has the standard 5/8 x 24 threads. So I am going to order the Browning recoil hawg instead.

Yup it is the 5:8ths for sure,, that stuck out when I ordered mine because it was in the description of the rifle. Sorry about that. I was looking at the Browning Brakes I think it was on the long range Hells Canyon?? The one with the big dip in the stock?? I'll look again?

 

[tknuts103]

Yup it is the 5:8ths for sure,, that stuck out when I ordered mine because it was in the description of the rifle. Sorry about that. I was looking at the Browning Brakes I think it was on the long range Hells Canyon?? The one with the big dip in the stock?? I'll look again?

Interesting. I called Browning with my serial number and they told me 13x.75 before I ordered my brake. Whoever was working obviously didn't look up my gun. Great customer service Browning

 

[michaelfelix13]

I am new at this never had a brake on a hunting rifle only on AR. Is there a big difference in the browning supplied brake vs the one you purchased?

 

[michaelfelix13]

Sorry to hear it's the wrong size

 

[tknuts103]

I just don't want a radial brake because when shooting prone it will shoot debris everywhere and they don't seem to help a ton with recoil. A nice one with side ports will reduce the recoil 50-75 percent and you can shoot prone no problem.