LRShooter7mm
Well-Known Member
I am loading a 140gr Berger, 50.7grs of IMR4955, Lapua Brass, CCI 250, 3012 fps very temp stable powder i have found. This is out of my 6.5-284 with a 26" Proof barrel 1:8 twist.
With help from Greyfox I worked up a load in my 6.5-284 Norma with Rel 26 and the Sierra 130 grain Gamechanger using Lapua brass and sparked by Fed 210 GM primers. Starting at 54 grains I worked my way up in .3gr increments to 57.6 and still didn't see any pressure signs. This is in a Schultz and Larsen rifle with a 26" barrel with bullets 0.030" off the lands.
Rel 26 loads,
Ave ES SD
56.5 gr 2968 11 5.6
56.8 gr 2988 4.45 1.89
57 gr 3016 33 16.6
57.3 gr 3036 4.5 2.58
57.6 gr 3046 18.9 10.07
Due to an upcoming hunting trip I settled on the 56.8 gr load which produced sub .25 MOA groups at 100m and .44 MOA at 400m. I believe there is another higher node heading closer to the 3100 fps mark.
The deer in my avatar was shot with the 56.8 gr load at 300m with a neck shot.
View attachment 176927View attachment 176928
With 26 Velocity is there accuracy not so much for me 23 did much better 140 Vldh at 2980 fpsI'm working on 6.5-284 loads as well, and will be following this post.
Seems like h4831 is a favorite for many, and there is quite a bit of info for loads using this powder.
I have a decent start with Retumbo, but haven't found quite the right load..
I'm hoping someone might chime in with some insight on RL26... I have some that I have not yet been able to load up. Would love to hear some
recommendations!
1 in 8 twist ? Thanks .I'm running RL 26 under 156 Bergers in my 6.5-284 Norma. Seeing right at 3000fps with no pressure signs. The load I settled on was 55.1gr RL 26, Lapua brass, Fed210m primers. I'm seated 0.035 of lands.