6.5 x 284 to 284 Win

[ShortMag3]

I am looking into converting 6.5 x 284 Nosler brass into 284 brass. Is there a place where I can find the proper procedure for doing this? Any advice would be appreciated.

ShortMag3

 

[ridge rider]

Google "Sinclairs International" and type in the search window for a 7mm expander mandrel and die set.
Just remember to also purchase the correct type and apply sufficient lubrication to avoid collapsing the necks.
It is a pretty simple operation.
Hope this helps.

 

[roadhunter]

Hey Shortmag3,

I just re-sized 100 pieces of Lapua 6.5-284 to straight 284 win by simply lubing them well and running them through my RCBS 284 Win sizing die. Worked great no problems what so ever. Good Luck

RH

 

[jcvibby]

I take my brass and run it through my standard redding 284 sizer. I have the tapers sizing button. Its perfect. Not one problem