6.5 saum

375ultramag

Well-Known Member
Joined
Feb 18, 2013
Messages
268
Location
Michigan
I am in the process of having a 6.5 saum built. I ordered a 6.5 gap 4s reamer and gauges from PTG and sent them to Hart along with the action. I also ordered a custom set of Redding 6.5/300 saum dies and now I am worried the dies won't work with the reamer I ordered. Anybody have any experience with the Redding dies and gap 4s reamer. Thanks
 
I am in the process of having a 6.5 saum built. I ordered a 6.5 gap 4s reamer and gauges from PTG and sent them to Hart along with the action. I also ordered a custom set of Redding 6.5/300 saum dies and now I am worried the dies won't work with the reamer I ordered. Anybody have any experience with the Redding dies and gap 4s reamer. Thanks

Can't answer your question directly but go here:
Care And Feeding Of A GAP 6.5 SAUM.....

and here:
Loads for 6.5 SAUM 4S

for all the help you need.
 
Warning! This thread is more than 10 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.

Recent Posts

Top