Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
6.5 PRC load question
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="Squatch" data-source="post: 2137900" data-attributes="member: 82800"><p>Ok, so I have been reloading since I could reach the handle on the press. Not precision reloading, reloading to save money and load better bullets.</p><p>Fast forward, I am 50yrs old, my kids are out of the house and I have officially jumped in to the deep end of the pool of learning precision reloading over the last 4ish years. I have learned a ton from the good members on this site.</p><p>My question surrounds max loads and pressure signs. I have a Proof MTR in 6.5 PRC. During break in, load development and now dialing in my load this gun is shooting sub .5 moa groups in my local underground 100yd range.</p><p>I ran a ladder test for velocity and to look for pressure signs in the underground range (roughly 62 degrees) being it has been -30 in ND for the last month. No visible pressure. </p><p>Loading ADG brass</p><p>GM210M primers</p><p>156 Bergers</p><p>56.8 gr of RL26.</p><p>This loaded is running 3030fps per my magnetospeed with an SD of 2.4. Crazy good. My brass shows no extractor marks, primers look good and the bolt lifts with no resistance. </p><p></p><p>Should I be concerned shooting this large of a load when summer temps are in the 80s? With no good published load data I am looking for advice or input on this load.</p><p></p><p>Thanks in advance.</p></blockquote><p></p>
[QUOTE="Squatch, post: 2137900, member: 82800"] Ok, so I have been reloading since I could reach the handle on the press. Not precision reloading, reloading to save money and load better bullets. Fast forward, I am 50yrs old, my kids are out of the house and I have officially jumped in to the deep end of the pool of learning precision reloading over the last 4ish years. I have learned a ton from the good members on this site. My question surrounds max loads and pressure signs. I have a Proof MTR in 6.5 PRC. During break in, load development and now dialing in my load this gun is shooting sub .5 moa groups in my local underground 100yd range. I ran a ladder test for velocity and to look for pressure signs in the underground range (roughly 62 degrees) being it has been -30 in ND for the last month. No visible pressure. Loading ADG brass GM210M primers 156 Bergers 56.8 gr of RL26. This loaded is running 3030fps per my magnetospeed with an SD of 2.4. Crazy good. My brass shows no extractor marks, primers look good and the bolt lifts with no resistance. Should I be concerned shooting this large of a load when summer temps are in the 80s? With no good published load data I am looking for advice or input on this load. Thanks in advance. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
6.5 PRC load question
Top