6.5 prc load problems

143 eldx , 140 hybrids , 130 vld all won't chamber


Do you have a Hornady comparator? The 143 and 147 have near identical measurements and the Bergers all have shorter bearing surface so if they are actually 2.945" then the Bergers should be farther from the lands.
 
Sorry this is cross posted to the fb group so I forgot he hadn't mentioned which bullets yet. None of those bullets should be an issue at 2.945
Does not mean the bullets have the same measurement at the ogive.

What bullets did you order?
 
Can you describe where it chokes up? Is the bolt doing everything but closing?
 
Warning! This thread is more than 6 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.
Top