OG-danimal
Well-Known Member
Anybody have a load worked up for 140 nosler partitions in a 6.5 prc? I have H1000, retumbo, N160. 24" proof barrel with 1:7.5 twist.
Cheers!
Dan
Cheers!
Dan
6.5 prc load for 140 nosler partitions
- Thread starter OG-danimal
- Start date
Help Support Long Range Hunting Forum
OG-danimal
Well-Known Member
Up
Another Casual
Well-Known Member
Nosler, hodgdon, and the Hornady app have data for all but the N160 you listed. I haven't done partitions, but 140 accubonds over 58.7g H1000 gave me 3,080 FPS in a 26" without feeling like I was pushing the envelope.
sable tireur
Well-Known Member
- Joined
- Oct 8, 2010
- Messages
- 3,376
I used MRP for one of my hunting loads:
Hodgdon.com can be your friend...
Twist: 1:8.000"
Barrel Length: 24.000"
Trim Length: 2.015"
BULLET WEIGHT
140 GR. NOS BT
CASE HORNADY
PRIMER FEDERAL 210M, LARGE RIFLE
Twist: 1:8.000"
Barrel Length: 24.000"
Trim Length: 2.015"
BULLET WEIGHT
140 GR. NOS BT
CASE HORNADY
PRIMER FEDERAL 210M, LARGE RIFLE
| Starting Load | Maximum Loads | |||||||||||||
| Manufacturer | Powder | Bullet Diam. | C.O.L | Grs. | Vel. (ft/s) | Pressure | Grs. | Vel. (ft/s) | Pressure | |||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Hodgdon | H1000 | OUT OF STOCK | 0.264" | 2.880" | 47.9 | 2,567 | 45,400 PSI | 57.7C | 2,902 | 61,000 PSI |
WoodPecker Hunter
Well-Known Member
48,0 of H1000 is way to LOW a load to start with ? 54 grs is a good starting point With 140-143 gr bullets . Work up from there . I like RL26 the BEST. for vel and accuracy in my rifle with a Benchmark barrel . JMO
