6.5 PRC -> GA Precision

seidersjoden

Well-Known Member
Joined
Oct 31, 2012
Messages
278
Location
CO
Very clean and well kept 6.5 PRC. I've used this hunting and in a few long range competitions. This shoots VERY well. Round count is 723. Firm on Price - $4900
  1. GA Precision Tempest short action right handed. GA Precision did the gunsmithing.
  2. Bartlein - Heavy Palma 26” 1-7.7” twist barrel
  3. 2.5lbs Trigger Tech Primary
  4. Butt Pad - 1/2 Inch Pad - 13.5 LOP
  5. Hardware - Flush Cup 2 Left - 1 front 1 rear
  6. GEN II little bastard self timing muzzle brake
  7. Kahles K624i (6x24x56i) with SKMR3 reticle with original box and scope cover
  8. Vortex Precision bubble level
  9. MCS-T4 Elite Tactical fixed cheek fixed butt, 100% Carbon Fiber
  10. DBM Gen 2 Mini-Chassis
  11. Atlas Pic Rail
  12. Triad Tactical Cheek piece and stock pack
  13. Two 10 rnd and one 3 rnd magazine

**Atlas bipod not included
 

Attachments

  • IMG_0119.JPEG
    IMG_0119.JPEG
    1 MB · Views: 101
  • IMG_0120.JPEG
    IMG_0120.JPEG
    1.4 MB · Views: 88
  • IMG_0115.JPEG
    IMG_0115.JPEG
    888.1 KB · Views: 96
  • IMG_0117.JPEG
    IMG_0117.JPEG
    692 KB · Views: 98
  • IMG_0118.JPEG
    IMG_0118.JPEG
    641.9 KB · Views: 92

ghay

Well-Known Member
Joined
Nov 27, 2010
Messages
674
HOW MUCH THROAT EROSION IS THERE WITH THIS MANY ROUNDS DOWN THE TUBE?
 

seidersjoden

Well-Known Member
Joined
Oct 31, 2012
Messages
278
Location
CO
HOW MUCH THROAT EROSION IS THERE WITH THIS MANY ROUNDS DOWN THE TUBE?
I don’t have a borescope but based off the performance I would say the throat hasn’t eroded at all. In my experience with Bartlein Barrels, it takes a really high velocity round or a lot more rounds than 700 before seeing signs of throat erosion. based off bulket seating depth, and I have checked several times, it has not changed. My load is 56.6 g of H1000 with 147 grain ELD-M bullets, after 400 and rounds the barrel finally stopped speeding up and it settled at 3036fps. That has not changed in the last 300 rounds. Every time I shoot it I either true ballistics with a kestrel or chrono with a magneto speed and it has not changed. It shoots the factory Hornady ammo with 147 grain ELDM at 2985 to 2990. I was amazed as the barrel kept speeding up until I hit the 350-400 mark, now it shoots great whether you reload for it or you use factory ammo. I’d be willing to throw my set of our RCBS gold medal match dies in but definitely can’t budge on 3200.
 

ghay

Well-Known Member
Joined
Nov 27, 2010
Messages
674
Impressive rig, just too heavy for the hunting I had in mind...I don't think it will last long! Good luck on your sale!
 
Top