6.5 prc 135 berger load data

amork

Well-Known Member
Joined
Nov 10, 2014
Messages
117
Location
montana
Hey is there anyone out there willing to share load data for the 135 bergers in a 6.5 prc? I went to look at my nosler manual thinking there would be something very close that I could use but realized nosler only has 130's and 140's so I'm kind of out of luck there. Ive ordered a berger manual but here in the middle of nowhere eastern montana it takes me quite a while to get anything in the mail lately. Thanks!
 

CPGfan

Well-Known Member
Joined
Mar 2, 2010
Messages
1,270
Location
Central WY
58.8 RL26 in ADG brass and a 210 primer produced 3095 in a 19.5” bbl for me. Was another great node at 57.9 @ 3025
 

Levi8599

Well-Known Member
Joined
Oct 17, 2014
Messages
168
Location
AZ
Adg brass 135berger BR2 N560 ran a quick ladder and was @ 3050-56gr up to 3188-58gr

had sub .4” groups with 57gr and 57.6gr. Still going to play some more with seating depths. See if I can’t tighten those up a bit.
 

Tony Covell

New Member
Joined
Feb 20, 2021
Messages
2
Location
Bradford Pa
Hey is there anyone out there willing to share load data for the 135 bergers in a 6.5 prc? I went to look at my nosler manual thinking there would be something very close that I could use but realized nosler only has 130's and 140's so I'm kind of out of luck there. Ive ordered a berger manual but here in the middle of nowhere eastern montana it takes me quite a while to get anything in the mail lately. Thanks!
Try 56.1 to 61.6 of rl26. Or 58.4 to 64.2 of h1000. These are from berger
 
Top