6.5 Grendel II Dies

fellas2

Active Member
Joined
Jun 2, 2011
Messages
44
Location
Southwest Pa
The head spacing is different. Type I has a .125" bolt face depth and Type II is .136" bolt face depth.
 

EdKin

Member
Joined
Sep 5, 2020
Messages
18
Location
Manteo NC
Brass and dies are the same only difference is the bolt on a type 1 & 2. 264 LBC dies will also work for the Grendel
 

Ckgworks

Well-Known Member
Joined
Mar 6, 2018
Messages
744
Location
Washington
The only difference is in headspace location.....the brass is the same, dies the same. The only difference is in a type 2 more of the brass is in the bolt rather than the barrel. As far as reloading goes, there is no difference. Both shoot the same ammo. Set the dies up the same for either and load away. Don't mix type 1 and type 2 barrels or bolts and you'll be fine.
 

Quackshot

Well-Known Member
Joined
Apr 25, 2011
Messages
917
Location
Rapid City
The only difference is in headspace location.....the brass is the same, dies the same. The only difference is in a type 2 more of the brass is in the bolt rather than the barrel. As far as reloading goes, there is no difference. Both shoot the same ammo. Set the dies up the same for either and load away. Don't mix type 1 and type 2 barrels or bolts and you'll be fine.
So the brass goes into the chamber the same distance. The bolt recess is slightly different but wouldn't affect the resizing of the brass. I'm starting to get it. Thanks
 

Primary

LRH Assistant
Here are some related products that LRH members are talking about. Clicking on a product will take you to LRH’s partner, Primary, where you can find links to LRH discussions about these products.

 
 
Top