Separate names with a comma.
Discussion in 'Sold/Expired' started by BMC15, Jun 14, 2018.
Does anyone have any idea what Nolser 6.5-284 brass is selling for (once fired)?
Not sure. You can buy new for around $1.25/ea.
Not sure on Nosler, but you can get Lapua (better) 6.5x284 brass once fired through Gunwerks for $65 per 100+ shipping.
I just bought 100 from them and they are great.
I have a lot of lapua 6.5 x 284 brass. Let me know if interested. I also have some that are new that have already been neck turned. I have a Sinclair neck turning tool also for 6.5mm
How many firings can you get through Lapua? My 6.5-284 is almost built and that's the brass I'll be running since I got a great deal on a new box.
This is my first 6.5-284 lapua brass so I cant answer your question. I have Lapua brass in almost every rifle I own and haven't ever wore one out yet. I have only ten firings on most but they all look great.
I’ve gotten at least 10 from my 308 lapua. I’m not sure on the 6.5 284 yet.
Great. Thanks guys
My .260 AI lasted 12+ fireings with Lapua, including load developement on this brass, and have been running a 140 VLD at 3070 fps, so not a low pressure load. I have started culling brass due to primer pockets getting loose, down to about 50 left on firing 14. However, I now have peterson small rifle primer brass for my .260 to test out.
Lapua is good stuff, I went with peterson to buy American and have a small rifle primer in my .260
I found some new Norma brass for .725 ea, downside is you have to buy in a bulk box of 2000 rounds. Split it up? $1450 for the case.