6 6.5x61Super Well-Known Member Joined Jul 20, 2009 Messages 140 Location Central Ohio Sep 29, 2009 #1 ...I am in the process of building a 6.5-25WSSM anyone have a reamer I can rent? PM for details..thanks!
...I am in the process of building a 6.5-25WSSM anyone have a reamer I can rent? PM for details..thanks!
6 6.5x61Super Well-Known Member Joined Jul 20, 2009 Messages 140 Location Central Ohio Sep 30, 2009 #2 I spoke with Dave Kiff at PT&G...he will make one for me. 0.301 neck 0.188 freebore thanks.
W winmagman Well-Known Member Joined Mar 13, 2003 Messages 1,379 Location Southern Wisconsin Sep 30, 2009 #3 With a .301 neck you will most likely have to turn your necks. My loaded rounds run right at .303 which is exactly the neck size of the Pac Nor prefit barrel I used for both of my 6.5-25 WSSMs. Good luck on your project Chris
With a .301 neck you will most likely have to turn your necks. My loaded rounds run right at .303 which is exactly the neck size of the Pac Nor prefit barrel I used for both of my 6.5-25 WSSMs. Good luck on your project Chris
6 6.5x61Super Well-Known Member Joined Jul 20, 2009 Messages 140 Location Central Ohio Sep 30, 2009 #4 copy that....my neck wall thickness = 0.0175" thanks..
Boss Hoss Well-Known Member Joined Nov 10, 2005 Messages 1,953 Location Texas Oct 1, 2009 #5 Speedy speced out mine that Dave Kiff built for my 6.5 WSM. Shoots lights out!!! Make sure and make the dies from the reamers. Good Luck..
Speedy speced out mine that Dave Kiff built for my 6.5 WSM. Shoots lights out!!! Make sure and make the dies from the reamers. Good Luck..
6 6.5x61Super Well-Known Member Joined Jul 20, 2009 Messages 140 Location Central Ohio Oct 1, 2009 #6 I spoke with Dave Kiff again...I must say he and you guys have been an immense help on my project. I will be sending him a "dummy round" which he will be making a reamer from. Thanks again! Last edited: Oct 1, 2009
I spoke with Dave Kiff again...I must say he and you guys have been an immense help on my project. I will be sending him a "dummy round" which he will be making a reamer from. Thanks again!