45/70

george

Well-Known Member
Joined
May 27, 2002
Messages
53
Location
new orelans, la.
Does anyone handload a 45/70. I just purchased a Winchester new manufacture hiwall, the one with recoil pad and no sights. It is a hunting gun, primarily withetail deer, may hunt black bear next year.
 
I load one for a Ruger #1 and your Browning could take the same loads.I use a cast 390gr bullet over 36gr of IMR 4759 for 1950fps. It has a 1.5 x 6 Sightron (sp) and zeroed for 300 yds, it is hell on rocks at that range.Other powders that work well in 45-70's are IMR3031 or Accurate 5744. In the back of Lyman # 47 or #48 there loads for "STRONG" action 45-70's.
 
My load for my Marlin is the 300 gr Remington HP and 56 gr of IMR 3031. Not a max velocity load (1900 fps) but it will cut bullet holes at 100 yds and whitetails are very impressed by it!
 
Warning! This thread is more than 18 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.
Top