338 rum

yak

Member
Joined
Aug 12, 2010
Messages
9
as many seem to be looking for loads for the 338 rum, which i am a big fan of, ill share a few favorites with you all, 225gr. horn. sst, 100 gr. rl-25 for 3258 fps, hell of an elk loadat long range. 250 gr. sierra mk. 91 gr. rl-25, for 3033 fps. and my newest one all from a factory barrel of 26 in. 300 gr. berger, 88 gr. rl-35 for 2788 fps, havent stepping on this one yet, but at 300 yards 5 rounds into .990. hope this helps spmeone out
 
as many seem to be looking for loads for the 338 rum, which i am a big fan of, ill share a few favorites with you all, 225gr. horn. sst, 100 gr. rl-25 for 3258 fps, hell of an elk loadat long range. 250 gr. sierra mk. 91 gr. rl-25, for 3033 fps. and my newest one all from a factory barrel of 26 in. 300 gr. berger, 88 gr. rl-35 for 2788 fps, havent stepping on this one yet, but at 300 yards 5 rounds into .990. hope this helps spmeone out

Welcome, yak, thanks for sharing the info. You can bet many will use it!

300 gr. berger, 88 gr. rl-35 for 2788 fps

Here you meant reloader 25, right?
 
Last edited:
yak,

Welcome aboard.

Good post 'cept for the '3'?:)

I'm beginning to think from posts like yours that the 338 RUM and most probably the Lapua will work with about any powder in that burn rate range.

I've used US-869 and settled on H-50BMG for the Hybrids.
 
Welcome, yak, thanks for sharing the info. You can bet many will use it!



Here you meant reloader 25, right?
yes, i m sorry for that. typo. reloader 25 seems to be the best for me so far. going to try a couple of others and see
 
yak,

Welcome aboard.

Good post 'cept for the '3'?:)

I'm beginning to think from posts like yours that the 338 RUM and most probably the Lapua will work with about any powder in that burn rate range.

I've used US-869 and settled on H-50BMG for the Hybrids.
how much of 50 bmg are u useing, thats one i want to try.
 
Angus-5024, "300 SMK @ 2785 fps with 93 grains Retumbo" What barrel length were you shooting to get 2785fps. I have a 27' Pac-nor barrel on a 338 rum that I should get from my gunsmith next week. Just wondering what to expect in terms of velocity with 300g bullets.
Thanks
 
Thats with a 26" factory Remmy XCR. I was please that I beat my hopes of 2750fps. I would hope that you would get a little better, but if not thats still good velocity.
 
Warning! This thread is more than 14 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.
Top