Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
338 Norma Reloading Data
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="Jakeweb09" data-source="post: 2047073" data-attributes="member: 113122"><p>correct. I didn't set the 250s up that close to the lands because I knew I'd never carry a round like that through the mountains. I loaded the 250s base right to the shoulder/body junction and did seating depth in the opposite direction. Working towards the lands until I was .100 from the shoulder/body junction. I didn't feel to comfortable going much farther. I did get a 1/2 moa group down at the starting charge (2530 FPS) when testing seating depth right at the shoulder/neck junction. Off the top of my head I think the ogive measurement was 2.606. Then upon charge workup with that depth I got about a 3/4 moa group at 88 grains but my velocity spread was way bigger then I'm comfortable going with for stretching it out. I might continue up in charge as well and see if it levels out. But regardless I will be trying the 260 hammers as I should be able to seat then at .02 off and work up my charge fairly quickly. Steve from hammer recommended starting at 88 grains.</p></blockquote><p></p>
[QUOTE="Jakeweb09, post: 2047073, member: 113122"] correct. I didn’t set the 250s up that close to the lands because I knew I’d never carry a round like that through the mountains. I loaded the 250s base right to the shoulder/body junction and did seating depth in the opposite direction. Working towards the lands until I was .100 from the shoulder/body junction. I didn’t feel to comfortable going much farther. I did get a 1/2 moa group down at the starting charge (2530 FPS) when testing seating depth right at the shoulder/neck junction. Off the top of my head I think the ogive measurement was 2.606. Then upon charge workup with that depth I got about a 3/4 moa group at 88 grains but my velocity spread was way bigger then I’m comfortable going with for stretching it out. I might continue up in charge as well and see if it levels out. But regardless I will be trying the 260 hammers as I should be able to seat then at .02 off and work up my charge fairly quickly. Steve from hammer recommended starting at 88 grains. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
338 Norma Reloading Data
Top