• You must be a Supporting Member to create a listing in the Long Range Hunting Marketplace. To read all the rules, click here.

    We offer multiple options to become a Supporting Member here.

30mm Rings - 2 sets

The Oregonian

Well-Known Member
Joined
Jul 20, 2012
Messages
2,288
Location
Missoula, Montana
Both sets sold...

Have one set of low Ken Farrell steel rings. $100 shipped, I eat paypal fees.

Have one set of NF low ultralight rings, 4 screw. $110 shipped, I eat paypal fees.

Both like new.

NF:
00_E48_B42-_A1_CE-4_FFF-_B692-475_AE136_F1_B1.jpg


Farrell:
77_A16_C7_E-_FBD0-4578-9_A9_C-542_B9_A924_E63.jpg
 
Last edited:
Was looking at your nightforce rings could you measure them from the base where they sit on top of the rail to the bottom of where the scope tube would be? I know they say 1" on the nightforce web site.
I measured a set of 34mm medium rings in the same height from that spot and to the center and never saw the 1" measurement so I'm not sure how they measure them.
Thanks Scott
 
It looks like the NF are low. NF said to measure from top of where the rail would be to a line on bottom ring half. This line is on the inside just below the top of bottom half of ring.

I measured .885 on these so they are LOW rings. These rings housed an NXS 2.5x10x42. I edited the OP.

Thx
 
Hi is it possible to weigh these steel Farrell's.
Nothing on their site for reference. thanks
 
Top